Home Comfort
Through-The-Wall
Air Conditionerꢀ
FRA144HT2
Product Dimensions
Height
Width
Depth
14-1/2"
24"
20-1/2"
More Easy-To-Use Features
Multi-Speed Fan
Features three different fan speeds, for
more cooling flexibility.
Sleep Mode
Quiet operation keeps you cool without
keeping you awake. Plus, Sleep Mode
gradually increases room temperature
after being activated.
Quickly Cools
Quickly cool a room on hot days.
Comfort Control Design
Easily control the direction of your cool air,
wherever your unit is.
Effortless™ Restart
Automatically resumes operating at its
previous settings when power is restored
to your unit.
Clean Filter Alert
Notifies you when your filter needs to be
cleaned.
Power Cord
Comes with an extra long three-prong
cord that makes extension cords
unnecessary.
SpaceWise® Adjustable Design
Optional Side Panels
Extend so you can adjust your unit to fit
your window.
Signature Features
Effortless™ Remote
Temperature Control
Ready-Select® Controls
Easily select options with the touch of a
button.
24-Hour On/Off Timer
Keep things cool on your schedule.
A themostat located on your air
conditioner’s remote control precisely
maintains preset room temperature, so
you will remain comfortable at all times.
Performance
BTUs
Cool
14,000ꢀ/ꢀ13,600
Effortless™ Clean Filter
Our antibacterial filter reduces bacteria,
room odors and other airborne particles
for a cool, comfortable environment.
Remote Control
Allows you to precisely control the
temperature and fan speed from across
the room.
frigidaire.com
Home Comfort
FRA144HT2
Through-The-Wall Air Conditioner
Plug Type (NEMA)
6-15P
Home Comfort Specifications
Replacement Installation
•
•
•
Product Shipping Weight (approx.) – 93 Lbs.
When replacing existing air conditioner with new unit, refer to
Product Installation Guide on web to identify existing wall-sleeve
manufacturer and size compatibility. If proper installation and slope
are suspect, then correct installation of Frigidaire® Through-The-Wall
18" Sleeve Kit PNꢀ#EA108T recommended.
Use of existing wall sleeve to mount new unit requires original sleeve
be in sound structural condition with rear grille that attaches securely,
or rear flange that serves as stop for unit.
Preferable installation option, for increased efficiency and possibility
of drafts reduced, requires existing rear grille (mounted to sleeve) be
replaced with new unit’s rear air-directional louvered grille (provided
in accessory kit, shipped with unit). Non-preferable installation option
of directly mounting rear louvered grille to unit can be considered,
requiring grille be mounted to unit prior to sleeve installation.
Single phase 3-wire cable, 240ꢀ/ꢀ208ꢀVolt, 60 Hertz AC only electrical
supply with ground required on separate circuit fused on both sides
of line.
Amps @ 240ꢀ/ꢀ208ꢀVolts = 7.4ꢀ/ꢀ8.4 Amps
Recommended Circuit Breaker – 15 Amps
Unit equipped with 240ꢀ/ꢀ208V 3-wire power supply cord, NEMA plug
type 6-15P, approximately 72" long.
Unit’s increased performance characteristics result from two rear
intakes. For unit to operate at maximum efficiency, carefully follow
complete, detailed new or replacement installation instructions
provided in Product Installation Guide on web.
•
•
•
•
•
•
•
Unit requires rearward slope when installation is complete, to allow
condensate to drain from rear of sleeve.
•
•
Existing decorative exterior grille may be left in place, provided that
proper air-directional rear louvered grille is installed.
For installation into larger existing sleeve, optional Trim Kit
PNꢀ# EA120T available.
New Installation
•
For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit
PNꢀ#EA108T available. Recommended for proper installation.
Through-the-wall installation requires 18" maximum wall thickness.
For energy-saving purposes, install unit in shady location, preferably
a northern exposure; and do not block airflow inside with blinds,
curtains or furniture; or outside with shrubs, enclosures or other
buildings.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
•
•
Optional Accessories
•
•
•
Through-The-Wall 18" Sleeve Kit – (PNꢀ# EA108T).
Trim Kit (for larger existing sleeve) – (PNꢀ# EA120T).
Architectural-Style Exterior Louvered Grille – (PNꢀ# EA109T).
•
•
•
•
USA 10200 David Taylor Drive Charlotte, NC 28262 1-800-FRIGIDAIRE frigidaire.com
Specifications
subject to change.
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca
FRA144HT2 04/11 © 2011 Electrolux Home Products, Inc.
Printed in the U.S.A.
|