baTTEry drivE, FTP-608 Series
2” HiGH SPEEd THErMaL PrinTEr
FTP-628 MCL101#11/ #21
Easy Loading Method
n OvErviEw
The easy loading FTP-608 MCL Series is ultra compact high
speed, battery driven thermal printer, printing on 2-inch wide
paper (58mm) where platens are removable. Our original
platen removal mechanism improved paper loading and
maintenance.
The FTP-608 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket
issuing terminals, label printers, banking terminals, and
measurement and medical equipment.
n HiGHLiGHTS
• Easy loading type
Our original platen removal mechanism improved paper
loading and maintenance.
• Ultra compact
Height ꢀ5.5 mm, width 70.2 mm, depth 33.0 mm for the 2
inch model.
• Low drive power
3 or 5V operation.
• High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
ꢀ
FTP-628MCL101#11/ #21
n SPECiFiCaTiOnS
Specification
FTP-628MCL101#21
Item
FTP-628MCL101#11
Interface
Conforms to RS232C / Centronics
averagecurrent
4.2 to 8.5VDC,averagecurrent 2.7 to 7.2 VDC,
2.4A (at 7.4 (3A)peak
1.9A (3.8A) peak
For print head
Printing ratio: 12.5%, printing Printing ratio: 12.5%, printing
Operating
Voltage
speed 60mm/sec. at 7.2 V
speed 40mm/sec. at 4.2 V
For motor
4.2 to 8.5 VDC, 1 A max.
2.7 to 7.2 VDC, 1 A max.
For logic
External dimensions
Weight
2.7 to 5.25 VDC, 0.1 A maximum
70.2 x 33.0 x 15.5 mm (WxDxH)
Approximately 42g
Pulse resistance: 100 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance
50km (print ratio: 25% or less)
Head life
Operating temperature*
0˚ C to +50˚
C
Operating humidity
Operating
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included )
5 to 95% RH (no condensation )
environment
Storage temperature
Storage humidity
Head temperature
Detected by thermistor
Detection
function
detection
Paper out/mark detection Detected by photo-interrupter
High sensitive paper:
TF50KS-E4 (Nippon Paper)
TK50KS-E (Nippon Paper)
PD150R (Oji Paper)
FTP-020P0107 (58mm)
Standard paper:
TK60KS-F1 (Nippon Paper)
FTP-020P0102 (58mm)
PD170R (Oji Paper)
AFP220VBB-1 (Mitsubishi
Paper)
Recommended thermal sensitive paper
Medium life storage paper:
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
TP50KJ-R (Nippon Paper)
HA112AA (Nippon Paper)
Long life storage paper:
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
FTP-628MCL101#11/ #21
n FUnCTiOn
Item
Item
1. Test print function
2. Paper out detection
3. Paper near end detection
8. Mark detection function
9. MCU operation abnormality detection
10. Power ON/OFF sequence protection
Thermal head temperature abnormality
4.
11. Motor over-current protection
12. Hardware timer
detection
5. Blow-out fuse detection
6. Head voltage abnormality detection
7. Motor power saving function
n diMEnSiOnS
1. Printer mechanism: 2- inch
FTP-628MCL101#11/#21
center of paper
58.0
24(paper end sensor)
ꢀ0.7
ꢀ5.5
62.2
64.7
65.6±0.ꢀ
4.6
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Dimension listed in ( ) is for reference
4
FTP-628MCL101#11/ #21
n PrinTEr COnnECTOr (FLExibLE PT bOard) Pin arrayS
FTP-628 MCL101#11 / #21
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product
No
1
Signal
I/ O Contents
PHK
VSEN
PHE
N.C.
N.C.
VH
—
I
Cathode for photo interruptor
2
paper sensor power
Emittor for photo interruptor
No connection
3
O
—
—
—
—
I
4
5
No connection
6
Head drive power
7
VH
8
DIN
Data in
9
CLK
I
Synchronous clock for communication
10 GND
11 GND
12 STB6
13 STB5
14 STB4
15 VDD
16 TH
—
—
I
Ground power supply for thermal head
Thermal head energizing control signal
I
I
I
Logic power
O
O
I
Thermally sensitive resistor input termnial 1
Thermally sensitive resistor input termnial 2
17 TH
18 STB3
19 STB2
20 STB1
21 GND
22 GND
23 LAT
24 DO
I
Thermal head energizing control signal
I
—
—
I
Ground power supply for thermal head
Data latch
Data out
O
I
25 VH
Power supply for thermal head
26 VH
I
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
Stepping motor excitation signal
I
I
Do not plug or unplug the FPC when power is on.
5
FTP-628MCL101#11/ #21
Fujitsu Components International Headquarter Offices
Japan
Europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (8ꢀ-3) 5449-70ꢀ0
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (8ꢀ-3) 5449-2626
Fax: (3ꢀ-23) 5560950
Email: [email protected]
Email: [email protected]
north and South america
Asia Pacific
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) 745-4900
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#04-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-302ꢀ
Email: [email protected]
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specifications/datasheets without prior notice. Rev. 03/22/2006.
6
|