BaTTery drive, MOBiLe TyPe
COMPaCT STandaLOne TherMaL PrinTer
2” eaSy LOading MOdeL
FTP-628WSL110/120
n OvervieW
The supply voltage of the FTP-628WSL Series is ꢀ20VAC
(via AC adaptor) or battery. The unit uses 2 inch wide
paper. The mechanism and interface board is a standard
multiple purpose unit.
The semi-rugged printer unit is most suitable for applications
such as handheld, mobile and portable devices, as well as
for various other equipment.
n FeaTureS
• Lightweight and ultra small size
• Easy paper loading
• Bluetooth®, infrared and serial interfaces
• 3.7V Lithion battery, ꢀ20 or 240 VAC adapter
• Drop-test - ꢀ.5 meters
• Water resistant
• Prints 2-D barcodes
• 3 hour charge cycle
• Up to 6 paper rolls / charge
• Program download capability
• Thin label capability
• RoHS compliant
• IP54 compliant
ꢀ
FTP-628WSL110 /120 Series
FTP-628WSLꢀꢀ0/ꢀ20 Specs continued
Item
Bar Code Type
Serial
Specification
UPC-A, UPC-E, JAN13, JAN8, CODE 39, ITF,
CODABAR, CODE 128, MAXI, PDF417, QR
RS-232C
Interface
IrDA
Version 1.2 (Ir COMM protocol)
Version 1.1 (SPP profile)
FCC Class B, FCC Part 15
JIS C0920 Class 2
Bluetooth*3
Noise
Safety Standard
Water resistant
Operating temperature 0˚C to +50˚ C*4
Operting humidity
Storage temperature
Storage humidity
Head temperature
Mark detect
30 to 85% RH (no condensation)
-20˚C to +60˚
Environmental
conditions
C
5 to 90% RH (no condensation)
Detected by thermistor
Detected by photo-interruptor
Detected by photo-interruptor
Detected by micro-switch
Detection functions
Major Functions
Paper out
Cover open
Page mode
Registration of character and image
Enlarge characters
Auto status reply
High sensitive paper TF50KS-E4 (Nippon paper)
FTP-020P0704
Standard Paper
TF-60KS-E (Nippon paper),
PD150R (Oji paper)
TF-60KS-F1 (Nippon paper),
PD170R (Oji paper),
P220VBB-1 (Mitsubishi paper),
FH65BC-3H (Oji Film)
Recommended thermal sensitive papers
Medium term paper
PD160R-N (Oji paper),
AFP-235 (Mitsubishi)
Long term paper
Label paper
HW54T (Nippon paper)
Notes: *ꢀ: There may be exeptions
*2: ESC/POSTM Seiko/Epson trademark
*3: FTP-628WSLꢀꢀ0 only
*4: 0 to +40˚C guarantee of print quality
3
FTP-628WSL110 /120 Series
n diMenSiOnS
4
FTP-628WSL110 /120 Series
n COMMandS
Command
Contents
HT
LF
Horizontal tab.
Line feed with printing.
FF
Feeds forms (new page).
ECS RS
Sets reverse printing.
ESC US
Resets reverse printing.
ESC FF
Data printing in page print mode.
Sets print mode.
ESC ! + n
ESC %+n
External registration character specification / cancellation.
External registration character definition.
Bit image mode registration
Sets the line feed length.
ESC &+y+c1+c2+x+d1~dn
ESC *+m+nꢀ+n2+[dꢀ~dn]
ESC 3+n
ESC ?+n
External registration character deletion.
Printer initialization.
ESC @
ESC A+n
Sets the space between lines.
Sets the page length by character line.
Sets the tab position.
ESC C+n
ESC D+n
ESC J+n
Feeds paper in forward direction and prints.
Reverse paper feed.
ESC K+n
ESC L
Page print mode selection.
ESC R+n
Selects international character.
Line print mode selection.
ESC S
ESC V+n
Right Rotation 90° specification / cancellation.
Print area setting in page print mode.
Sleep mode time setting.
ESC W+xꢀ+x2+yꢀ+y2+Dxꢀ+dx2+dyꢀ+dy2
ESC X+m+n
ESC c+ꢀ+n
ESC s+n
Sets internal processing.
Print speed setting.
ESC {+n
Sets/resets upside down printing.
RS-232C communication setting.
Kanji printing mode collective specification.
Kanji printing mode specification.
ESC Y SOH x a DLE + n
FS !+n
FS &
5
FTP-628WSL110 /120 Series
Commands continued
Command
Contents
Kanji printing mode cancellation.
Sets the detection functions.
FS .
FS 9+n
FS C+n
Kanji code system selection.
FS E+n
Correction of impressed energy.
Parameter transmission (valid for non-protocol mode).
Vertical absolute position specification in page print mode.
Registration of image data.
FS r+n
GS $+n+1+2
GS &+m+x+yꢀ+y2+[d]k
GS '+m+n
Prints registered image data.
GS <
Line feeds to the next mark.
GS A+m+n
Sets the line feed length after mark detection.
Bar code angle setting.
GS B+n
GS E+n
Print quality setting.
GS a+n
Setting and cancelation of status transmission. (non-protocol mode).
Bar code width setting.
GS e+n+m
GS h+n
Bar code height setting.
GS k+m+n+dꢀ~dN
GS k+m+kꢀ+k2+k3+k4+dꢀ~dn
GS (A ETX +n
GS (A ACK +m+n
GS (A BS +n+dꢀ to dn
GS (A HT +n+dꢀ to dn
GS (A ENQ
Bar code printing.
Two dimensional code printing.
Bluetooth link time setting.
Bluetooth security mode setting.
Bluetooth PIN code setting.
Bluetooth device name setting
Bluetooth, information printing (WSLꢀꢀ0 only).
Fujitsu Components International Headquarter Offices
Japan
europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo ꢀ4ꢀ 8630, Japan
Tel: (8ꢀ-3) 5449-70ꢀ0
Fax: (8ꢀ-3) 5449-2626
Email: [email protected]
Fujitsu Components Europe B.V.
Diamantlaan 25
2ꢀ32 WV Hoofddorp
Netherlands
Tel: (3ꢀ-23) 55609ꢀ0
Fax: (3ꢀ-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
north and South america
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (ꢀ-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
ꢀ02E Pasir Panjang Road
#0ꢀ-0ꢀ Citilink Warehouse Complex
Singapore ꢀꢀ8529
Fax: (ꢀ-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-302ꢀ
Email: [email protected]
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. February 2, 2007.
6
|