24V DRIVE, 2-COLOR THERMAL PRINTER
3" TYPE MECHANISM
FTP-632MCL101/102/353/354
■ OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
■ HIGHLIGHTS
FTP-632MCL101
• 2 Color printing
It can print 2 colors: blue/ black or red/black
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing:
- blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
FTP-632MCL353
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replace-
ment.
• Two paper paths
Front and bottom paper insertion is available.
FTP-622DCL/DSL4xx
1
FTP-632MCL101/102/353/354
(Continued)
Part number
Item
Specifications
FTP-632MCL101/102
FTP-632MCL353/354
24 VDC ±5% 2.3A
(24V Rav1500Ω, 25%printing ratio)
For head
For printer motor
For cutter motor
For logic
24VDC±5% 1A maximum
Power
supply
---
24VDC±5% 1A maximum
5VDC±5% 0.5 A maximum
Printer Mechanism
Mechanism with cutter
Interface board
Printer Mechanism
Mechanism with cutter
Head
108 (W) × 48 (D) × 20 (H) mm
---
Dimensions
---
117 (W) × 57 (D) × 38 (H) mm
131 (W) × 89 (D) × 24 (H) mm
Weight
Life
Approximately 94g
---
---
Approximately 340g
Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard
driving method)
Wear resistance: 50 km (at 25% print ratio)
Cutter
----
500,000 times minimum
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head release
+5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor
Environmental
conditions
Detection
By photointerrupter
By slide switch
2 color paper (blue/black) PB770 (Mitsubishi paper)
(red/black) PB670 (Mitsubishi paper)
Recommended
thermal sensitive
paper
High sensitivity paper
Standard paper
TF50KS-E4 (Nippon paper)
TF60KS-E (Nippon paper), FTP-030P0104(80mm)
PD150R (Oji paper), FTP-030P0701(80mm)
Medium term paper
TP60KS-F1 (Nippon paper), FTP-030P0102(80mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
3
FTP-632MCL101/102/353/354
■ FUNCTION
ITEM
ITEM
Motor power save
1.
2.
3.
4.
5.
6.
7.
Test printing
8.
9.
Paper-out detection
Mark detection
Paper near end detection
10.
11.
12.
13.
MCU trouble detection
Power on/off sequence protection
Motor protection
Head-up detection
Abnormal temp. of thermal head detection
Blown fuse detection
Hardware timer
Abnormal voltage detection of head
■ DIMENSIONS
1. Printer mechanism
FTP-632MCL101/102
20.1
CENTER OF PAPER
CAUTION
HOT
76.8(POSITIONING HOLE)
50.9
57.0
Unit: mm
(107.9)
2. Printer mechanism with cutter
0.5
37.2
13.3
MCL353
Å B ¢ ≥ Ç ∫ ≈ Ç ¢ â » Ç Á Ç Ç ê G … Ç
MCL354
3
00
(116.9)
Å} 1
59.9
57.0
(73.1)
FTJAPAN
Unit: mm
4
FTP-632MCL101/102/353/354
Interface board
105.4
87.6
41.8
21.8
CN9
CN5
CN3
30 29
1
2
1
CN1
CN8
CN7
1
4
4
1
33.2
86.4
105.4
120.7
5.1
4-Ø3.6 ±0.1
5.1
Height of devices side
Height of solder side
Unit: mm
5
FTP-632MCL101/102/353/354
■ CONNECTOR FOR THERMAL HEAD
1. Thermal Head
Head side : IL-FPC-28CLIP (JAE)
Board side : 52045 (Molex) or equivalent
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Motor
Head up level
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
No. Signal Comment
No. Signal Comment
1
2
3
4
5
VSEN Power for paper sensor
PHE Photo interrupter emittor
PHK Photo interrupter cathode
SW1 Head up detect switch 1
SW2 Head up detect switch 2
1
2
3
4
B
B
A
A
Pulse motor driving B
Pulse motor driving B
Pulse motor driving A
Pulse motor driving A
6
FTP-632MCL101/102/353/354
3. Cutter
Mech side : EHR-4 (J.S.T.) or equivalent
Board side : B4B-EH (J.S.T.) or equivalent
No Cable Color
Name
1
2
3
4
White
White
Red
Home position 1
Home position 2
Motor energizing signal M+
Motor energizing signal M-
Black
■ FUNCTION
ITEM
ITEM
Cutter trouble detection
Motor power save
1.
2.
3.
4.
5.
6.
7.
Test printing
8.
9.
Paper-out detection
Paper near end detection
Head-up detection
10.
11.
12.
13.
14.
Mark detection
MCU trouble detection
Power on/off sequence protection
Motor protection
Abnormal temp. of thermal head detection
Blown fuse detection
Abnormal voltage detection of head
Hardware timer
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-622DCL4xx DATA SHEET and the FTP-622DCL4xx DATA SHEET for Interface,
Command, and Options.
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 06/22/2004.
7
|