JTP75BM/CM/WM
GE® 30" Built-In Convection/Thermal Wall Oven
Dimensions and Installation Information (in inches)
Cutout width
28-1/2'' MIN.
28-5/8'' MAX.
5
KW Rating
C
L
Cutout depth
23-1/2" MIN
240V
208V
9.0
6.8
2 x 4 or
equivalent
runners
Junction box
location
E
A
Breaker Size
B
240V
208V
40 Amps
40 Amps
Conduit
(72"
long)
47" to
Suitable
bracing
to support
runners
bottom of
21-5/8"
over centerline
of cabinet
junction box
Cutout height
51-13/16" MIN.
51-15/16" MAX.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
(must support 325 lbs.)
D
A
Note: If marks, blemishes or the cutout opening is
visible above the installed oven, it may be necessary
to add wood shims under the runners and front trim
until the marks or openings are covered.
Cabinet
30"
11/16"-3/4"
1"
n
21
A – Overlap of oven over side of edges of cutout
B – Overlap of oven at top and bottom of cutout
Oven
21" minimum
Door Opening
Allowance
B
C – Overall depth*
23-1/2"
53-3/8"
52-7/8"
29-3/4"
Minimum cutout location
12" from the floor.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should be
placed to avoid interference with the handle.
D – Overall height with trim
Overall height without trim
E –Overall width
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.
C
Cabinet
width 30"
Installation Information: Before installing, consult
installation instructions packed with product for current
dimensional data.
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
Electric wall ovens are not approved for installation
with a plug and receptacle. They must be hard wired in
accordance with installation instructions.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 1/07
320148
|