JTP90SP
GE® 30" Built-In Double Microwave/Thermal Wall Oven
Dimensions and Installation Information (in inches)
20''
CABINET
WIDTH
30''
C
L
KW Rating
2 x 4 or
equivalent
runners
CUTOUT DEPTH
23-1/2'' MIN.
CUTOUT
WIDTH
240V
208V
6.4
5.6
28-1/2'' MIN.
28-5/8'' MAX.
Breaker Size
JUNCTION BOX
LOCATION
A
F
240V
208V
30 Amps
30 Amps
A
Suitable
bracing
to support
runners
C
21-5/8"
over centerline
of cabinet
CONDUIT
48-1/2"
(must support 275 lbs.)
Note: Cabinets installed adjacent to wall
ovens must have an adhesion spec of at
least a 194°F temperature rating.
CUTOUT
HEIGHT
42-3/16'' MIN.
42-1/4'' MAX.
28''
Cabinet
30"
11/16"
1"
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
A – Overlap of oven over side of edges of cutout
B – Overlap of oven at top and bottom of cutout
C – Overall of oven at top of cutout
Oven
D – Overall depth*
E – Overall height with trim
Overall height without trim
E –Overall width
*Depth including door handle is approximately 26-6/10" min. to
26-9/10" max.
1/2"
E
D
21" Minimum
Door Allowance
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
DOOR MUST BE
REMOVED BEFORE
INSTALLATION
23-1/2"
44"
43-1/2"
29-3/4"
B
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Minimum
cutout location
21-5/8''
from the floor
21''
Note: These ovens are not approved for
stackable or side-by-side installations.
MOST 30'' WALL CABINETS CAN BE USED WITH THIS UNIT.
THE OPENING BETWEEN THE INSIDE WALLS MUST BE AT LEAST 28-1/2'' WIDE.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 5/09
320223
|