Accessory
Backguard
PD900DP
GE Profile™ 30" Drop-In Electric Range
A/B*
24
31-1/4
Dimensions and Installation Information (in inches)
2-7/8"
To Front Surface
of Countertop
Note: Cabinets installed adjacent to slide-in ranges must have an
KW Rating
adhesion spec of at least 194° temperature rating.
11.6
8.7
240V
208V
Note: To reduce possibility of scorching the side walls above the
countertop when no load is present on burners, it is recommended
that a minimum of 6" spacing from adjacent side wall be allowed for
possible extended, high-heat, element operation.
27
Breaker Size
20-5/8" Door
Clearance
From Front
Surface of
Countertop
40 Amps
240V
208V
IMPORTANT: 30" DROP-IN RANGES ARE DESIGNED TO HANG
FROM THE COUNTERTOP. IT DOES NOT REST ON THE FLOOR.
FOR INSTALLATION ALTERNATIVES, REFER TO INSTALLATION
INSTRUCTIONS PACKED WITH PRODUCT.
40 Amps
26-1/2**
(excluding handle)
*JXS37 is 5-1/4" and JXS32 is 4"
**Total depth from wall to
front of closed oven door
including handle is 29-1/2.
Optional Kits For Drop-In Electric Ranges (Available At Additional Cost)
Accessory Backguards
(Attaches to the back of range
as a backguard when unit is installed
in 30" free-standing cutout)
JXS32SS (Stainless) - 4" High
JXS32WW (White) - 4" High
JXS32BB (Black) - 4" High
30" Min.
6" Min.
from walls
JXS37WW (White) - 5-1/4" High
JXS37CC (Bisque) - 5-1/4" High
JXS37BB (Black) - 5-1/4" High
30" Min.
Acceptable Electrical Outlet
Area Also In Adjacent
Cabinet Or Under Floor
23-3/16
27-1/2
15" Min.
Rear Filler Strip
Conduit is 40" long
WB07T10680 - Black Filler Strip Assembly
WB07T10681 - White Filler Strip Assembly
WB07T10682 - Bisque Filler Strip Assembly
If necessary,
build upsides
to 1-1/4" thick
to provide
25
countertop
support
36
Installation information: Before installing, consult installation
instructions packed with product for current dimensional data.
7-1/2
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
30
All GE ranges are equipped with
Listed by
Underwriters
Laboratories
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 5/09
220804
|