Gefen TV Cables EXT HDMI13 142 User Manual

®
1:2 Splitter For  
HDMI 1.3  
EXT-HDMI1.3-142  
User’s Manual  
 
CONTENTS  
1
2
3
4
6
7
8
Introduction  
Operation Notes  
Features  
Panel Descriptions  
Connecting And Operating The 1:2 Splitter For HDMI  
Specications  
Warranty  
 
INTRODUCTION  
Congratulations on your purchase of the 1:2 Splitter For HDMI. Your complete  
satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
The Gefen 1:2 Splitter For HDMI  
The Gefen 1:2 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-ray  
players and other HDTV devices with HDMI outputs to be connected to up to  
two HDTV displays (or more if multiple splitters are utilized in place of HDTV  
displays).  
How It Works  
The 1:2 HDMI 1.3 Splitter is a distribution hub that sends the same HDMI signals  
to up to two HDTV digital displays. You simply connect your HDMI video source  
to the 1:2 HDMI 1.3 Splitters HDMI input jack, then connect your HDMI-compat-  
ible displays to each of the HDMI outputs. Power-cycle all equipment and you  
should see beautiful, sharp HDMI video on all of your HDMI displays.  
1
 
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE 1:2 SPLITTER FOR HDMI 1.3  
By default, display information from the display connected to HDMI output  
port 1 is sent back to the source. Therefore, the other display connected  
to the 1:2 Splitter for HDMI 1.3 must be capable of accepting the timings  
and resolutions of the display that is connected to HDMI output port 1.  
It is recommended that the display with the lowest native resolution be  
connected to HDMI output port 1. This is to ensure that a compatible video  
signal will be able to be displayed on all connected monitors. There is a  
generic EDID programmed into the 1:2 Splitter for HDMI 1.3 that can be  
used instead. Please see page 6 for more details.  
HDMI/HDCP compliant  
Compatible with all HDMI and DVI displays*  
*When used with a HDMI to DVI adapter  
Connection Diagram for the 1:2 Splitter for HDMI 1.3  
EXT-HDMI1.3-142D  
2
 
FEATURES  
Features  
Connects up to two HDMI / DVI displays from one HDMI source  
Optionally add more displays by connecting splitters  
Easily attains resolutions up to 1080p, 2k, and 1920 x 1200  
HDMI and HDCP compliant  
HDMI 1.3 Features  
Lip-Sync Pass Through  
225 MHz (up to 12 bit YUV 444 supported @ 1080p)  
Deep Color Supported (XV Color Supported)  
Color Space Conversion Supported  
Dolby Tru-HD & DTS Master Supported  
CEC Pass Through  
Includes:  
(1) 1:2 Splitter for HDMI 1.3  
(1) 6 ft HDMI cable (m-m)  
(1) 5V DC Power Supply  
(1) User’s Manual  
3
 
PANEL DESCRIPTIONS  
Front Panel  
1
2
3
4
Back Panel  
5
6
7
8
9
10  
1
2
Power LED  
This LED will activate once a valid power source is applied.  
Internal EDID LED  
This LED will activate only when the pre-programmed internal EDID is being  
used. Please see page 6 for more details on the internal EDID.  
3
4
5
External EDID LED (default EDID routing)  
This LED will activate only when the external EDID is being used. Please  
see page 6 for more details on the external EDID.  
Link LED  
This LED will activate when a valid link between the source and the splitter is  
detected.  
EDID Button  
This button will activate the onboard EDID. Press this button (the Int. EDID  
should turn on and the Ext. LED should turn off) and reset the unit using the  
Reset button (below) to initialize this EDID mode. To use an external EDID,  
press the EDID button again (the Int. LED should turn off and the Ext. LED  
should turn on) and press the Reset button to initialize this EDID mode.  
6
Reset Button  
This button will reset the unit and initialize whichever EDID mode is currently  
selected.  
4
 
PANEL DESCRIPTIONS  
7
8
HDMI Input  
This is the input for the HDMI source device. When a valid source is  
detected by the splitter, the Link LED will activate.  
HDMI Out 1  
This is the rst HDMI output port. Connect a valid HDMI display to this port.  
When the External EDID mode is active, the EDID form the display  
connected to this port will be used to send to the source.  
9
HDMI Out 2  
This is the second HDMI output port. Connect a valid HDMI display to this  
port.  
10 5V DC Power Input  
This port is for the included 5V DC power supply. When a valid 5V power  
supply is attached, the Power LED will activate.  
5
 
CONNECTING AND OPERATING THE 1:2 SPLITTER FOR HDMI  
How to Connect the 1:2 Splitter For HDMI 1.3  
1. Connect the supplied cable from the HDMI source into the 1:2 Splitter for  
HDMI 1.3 input.  
2. Connect the cables from your displays (monitor or projector) into  
the HDMI outs of the 1:2 Splitter for HDMI 1.3. Up to 2 displays are  
supported.  
3. Plug the 5V DC power supply into the 1:2 Splitter for HDMI 1.3.  
NOTE: By Default, the display information from the display connected to HDMI output  
port 1 is sent back to the source. Therefore, the other display that is connected to the  
1:2 Splitter for HDMI 1.3 must be capable of accepting the timings and resolutions of the  
display that is connected to HDMI output port 1. It is recommended that the display with  
the lowest native resolution be connected to HDMI output port 1. This is to ensure that a  
compatible video signal will be able to be displayed on all connected monitors. There is  
a generic EDID programmed into the 1:2 Splitter for HDMI 1.3 that can be used instead.  
Please see below for the activation process.  
EDID MODE  
The HDMI 1:2 has an EDID button which will determine if the EDID is used  
from the display attached to output 1 (Ext. mode) or if the onboard EDID  
(Int. mode) will be used.  
The current EDID mode can be determined by which EDID mode LED is  
active on the front panel. The Ext LED will indicate that the external EDID  
(from output port 1) is being used, and the Int LED will indicate that the  
internal pre-programmed EDID is being used.  
If you want to use the onboard EDID, press the EDID button on the rear  
panel and then press the reset button to activate the new EDID mode. To  
revert back to using the external EDID, press the EDID button again and  
then reset the unit using the reset button to activate the new EDID mode.  
Listed Resolutions in the Internal EDID:  
1280x720p  
1280x720p  
1920 x 1080i  
1920 x 1080i  
720 x 480p  
720 x 576p  
1920 x 1080p  
1920 x 1080p  
1440 x 480p  
1440 x 576p  
50 Hz  
(Naitive)  
59.94 / 60 Hz (Naitive)  
50 Hz  
59.94 / 60 Hz  
59.94 / 60 Hz  
50 Hz  
50 Hz  
59.94 / 60 Hz  
59.94 / 60 Hz  
50 Hz  
6
 
SPECIFICATIONS  
Video Amplier Bandwidth ............................................................... 225 MHz  
Input Video Signal ...................................................................... 1.2 Volts p-p  
Input DDC Signal ................................................................ 5 Volts p-p (TTL)  
Single Link Range ........................................................... 1080p/1920 x 1200  
HDMI Connector ......................................................... Type A 19 Pin Female  
Power Supply ...................................................................................... 5V DC  
Power Consumption .............................................................. 13 Watts (max)  
Dimensions .................................................................... 9.4”W x 1”H x 4.6”D  
Shipping Weight .................................................................................... 3 lbs.  
7
 
WARRANTY  
Gefen warrants the equipment it manufactures to be free from defects in material  
and workmanship.  
If equipment fails because of such defects and Gefen is notied within two (2)  
years from the date of shipment, Gefen will, at its option, repair or replace the  
equipment, provided that the equipment has not been subjected to mechanical,  
electrical, or other abuse or modications. Equipment that fails under conditions  
other than those covered will be repaired at the current price of parts and labor in  
effect at the time of repair. Such repairs are warranted for ninety (90) days from  
the day of reshipment to the Buyer.  
This warranty is in lieu of all other warranties expressed or implied, including  
without limitation, any implied warranty or merchantability or tness for any  
particular purpose, all of which are expressly disclaimed.  
1. Proof of sale may be required in order to claim warranty.  
2. Customers outside the US are responsible for shipping charges to and from  
Gefen.  
3. Copper cables are limited to a 30 day warranty and cables must be in their  
original condition.  
The information in this manual has been carefully checked and is believed to  
be accurate. However, Gefen assumes no responsibility for any inaccuracies  
that may be contained in this manual. In no event will Gefen be liable for  
direct, indirect, special, incidental, or consequential damages resulting from  
any defect or omission in this manual, even if advised of the possibility of such  
damages. The technical information contained herein regarding the features and  
specications is subject to change without notice.  
For the latest warranty coverage information, please visit Gefen’s Warranty web  
PRODUCT REGISTRATION  
Please register your product online by visiting Gefen’s web site at  
8
 
 
Rev A1  
20600 Nordhoff St., Chatsworth CA 91311  
1-800-545-6900 818-772-9100 fax: 818-772-9120  
Pb  
 

Extron electronic Stereo System STP20 1000 20 User Manual
Fisher Price Baby Toy 77986 User Manual
Frigidaire Dishwasher FMB330RGC User Manual
FUNAI DVD Recorder ZC350MS8 User Manual
Gateway Personal Computer GT4015H User Manual
GE Freezer ZKHCSS2 User Manual
Generac Power Systems Portable Generator 91355 User Manual
GE Oven ZEK938 User Manual
Giant Bicycle SL 1 User Manual
Gitzo Camcorder Accessories G2220 User Manual