EM-10001LZ Bracket
Typical mounting on IN-SWINGING door
L-Bracket
Armature
Frame
Z-Bracket
Door
In-Swinging
30
5
250
25
The new special styling bracket enables more aesthetic
for the doors.
250
48
Application for the Electromagnet:
10001, 10004(Double) Series
42
55
250
Unit:mm
42
48
1
2
3
4
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
Tighten the electromagnetic lock
on the L bracket by using the
fixing screw.
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Insert the guide pins into the
armature plate. Put one rubber
washer between armature plate
and the Z bracket.
5
6
7
Finish
Power
Once the position is correct,
use the screws to permanently
mount the Z bracket on the door
frame.
Closing the cover on bracket.
Turn on the power of EM-Lock,
and let the armature plate bonds
to the EM-lock. Adjust the position
between the Z bracket and the
door frame.
Close the door. Measure the correct
position by bringing the armature
plate close to the contact surface of
the electromagnetic lock.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-10001LZ Ver. C Published on 2008.05.30
|