EX-827 Exit Controller
Dimension
83
180
50
Unit: mm
Statement
Key cylinder not included
for demonstration only
The EX-827 Exit controller is ideally suited to
enhance exit doors for airports, shopping malls,
department stores where you need to distinguish
outgoing individuals under control in well order.
Generally, a single indoors surface mount
installation for EX-827 constructed with
aluminum-coated housing that can block the lever
handle on door site and key override provides
convenience to converse underneath the face
part either left or right side turn from solely pin to
set from product inside. An activation of built-in
electronic buzzer operated by 9Vdc alkalized
battery that reaches for 97 dB wide-loud sound
from output frequency 3 KHz+/-0.5KHz,and
resettable with manual key switch.
Application
EXIT
Our unique designed anti-tamper screws on
EX-827 to ensure a long endurance and upgrade
on EX-827 to keep away vandalism attempting
that is what you can not miss!
EXIT
Warranty
The product is warranted against defects in material and
workmanship while used in normal service for a period of
1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
&
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2007 Gianni industries, inc. All rights reserved.
DM-CA-EX-827 Ver. C Published on 2008.05.19
|