Instruction Manual
name: Select
model number: SI-60
“Adjustable steam for all
types of floors.”
HAAN® Corporation
1866 Colonial Village Lane
Lancaster, PA 17601
phone: 877-422-6347
SI60_IS0006
Introduction
Congratulations on purchasing a HAAN® product. Now
you have an easy way to clean your tile, hardwood, lami-
nate, linoleum and vinyl floors.
Your floor sanitizer uses steam to remove tough grease,
dirt and grime. Steam is nature’s purest and most power-
ful cleaner for safely cleaning all hard surfaces in your
home without harsh chemicals, for a perfectly ecologi-
cal approach. No film, no residue – just clean, germ-free
floors.
HAAN® products are so easy to assemble, you can put
them to use right away – anywhere you want to clean
and sanitize – from your kitchen and living room to your
bathroom floors.
Backed with a one-year limited warranty, your quality
HAAN® product is sure to give you years of dependabil-
ity. And our Customer Care representatives are available
to answer any of your questions about your new floor
sanitizer.
Thousands of HAAN® customers have already fallen in
love with HAAN® Floor Sanitizers. We’re confident you
will, too.
Thank you again for purchasing the HAAN® Select Floor
Sanitizing Steam Mop.
The HAAN® Team
1
Important Safety Instructions
Basic precautions should be observed when using
an electrical appliance, including the following:
1.
Do not direct steam at people, animals, or
at electrical outlets.
Do not expose to rain.
IMPORTANT
Be sure to read ALL
instructions and warnings
before using your HAAN®
Floor Sanitizer.
2.
3.
4.
Store indoors.
Unplug from outlet when not in use and
before conducting service maintenance or
trouble-shooting.
5.
6.
Do not leave steam cleaner unattended.
Do not leave the steam cleaner connected
to an electrical outlet when not in use.
Do not service steam cleaner when it is
plugged in.
Do not use with damaged cord or plug.
Do not use steam cleaner if it has been
dropped, damaged, left outdoors or
dropped into water. Return to a service
center.
Do not handle steam cleaner with wet
hands.
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord
around sharp corners or expose cord to
heated surfaces.
Do not unplug by pulling on cord.
Do not use appliance in an enclosed space
filled with vapor given off by oil-base paint
thinner, some moth-proofing substances,
flammable dust, or other explosive or toxic
vapors.
Do not allow to be used as a toy.
Do not use on leather, wax polished
furniture or floors, synthetic fabrics, velvet
or other delicate, steam-sensitive
materials.
Do not immerse in water or any other liquid.
Do not use for any purpose other than
described in this User Manual.
Use only manufacturer’s recommended
attachments – use of attachments not
provided or sold by HAAN® may cause fire,
electric shock or injury.
WARNINg
Risk of electrical
shock: Be sure to read
and follow all instruc-
tions and warnings.
7.
8.
9.
CAUTION
10.
11.
The SI-60 emits steam
at 212˚F to sanitize
the area of use. This
means that the steam
head, Ultra-Microfiber
Pads and Carpet Glide
get very hot during
use. Care should be
taken when using this
appliance. DO NOT
touch them during use
except in the approved
manner as outlined in
this manual.
12.
13.
14.
15.
SAVE THESE
INSTRUCTIONS:
For household use only.
Any other use of this
appliance will void the
manufacturer’s warranty.
16.
17.
18.
2
Important Safety Instructions
19.
Never put descaling, aromatic, alcoholic or
detergent products into the steam cleaner,
as this may damage it or make it unsafe for use.
Unplug by grasping the plug, not the cord.
Close attention is necessary when used by or
near children.
20.
21.
22.
If the circuit breaker activates while using the steam
function, discontinue product use immediately and
contact the customer support center. (Beware of the
risk of electrical shock.)
23.
Do not allow the product to be disassembled and/
or modified by anyone other than an authorized
service technician. (Doing so can result in fire and/
or electrical shock.)
24.
25.
Do not puncture steam hose that is exposed by the
swivel steam head joint.
This product is NOT for space heating purposes.
Electrical Plug Instructions:
IMPORTANT
WARNINg
DO NOT modify the
plug. Improper con-
nection can result
in a risk of electrical
shock.
This appliance has a polarized plug (one blade is wider than
the other). As a safety feature, this plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse plug. If it still does not fit, contact a qualified electri-
cian. Do not attempt to defeat this safety feature.
3
Operating Instructions
Care & Maintenance
1.
Turn your floor sanitizer off and unplug from
the electrical outlet.
Wrap power cord around cord hangers.
Let your floor sanitizer cool for five (5) minutes
before removing the ultra-microfiber pad and
before emptying the water tank.
IMPORTANT
Always ensure that your
floor sanitizer is
2.
3.
UNPLUGGED from the
wall receptacle prior to
cleaning or emptying the
water tank.
4.
5.
Always empty the water tank when you have
finished using your floor sanitizer.
Never leave ultra-microfiber pad on floor
sanitizer when you have finsihed using it.
Always remove the ultra-microfiber pad and
wash in warm water with a mild detergent.
Never use bleach or fabric softener when
cleaning the ultra-microfiber pad.
CAUTION
Do not immerse your
floor sanitizer in water
or any other liquid.
The ultra-microfiber pad can be washed in a
washing machine and dried in a clothes
dryer but on low heat.
To decrease pad wear, we recommend the
pad be hung to dry for 24 hours.
Wipe your floor sanitizer with a damp cloth to
clean. Never immerse the sanitizer in water
or any other liquid.
In order to keep your floor sanitizer in good
condition, we recommend that you clean the
water tank once a month to eliminate calcium
deposits. Add eight ounces (8 oz) of water to
the water tank and insert 1 packet of Fresh
Rinse™ Lime and Scale Remover. Shake to
loosen any deposits. Place unit on resting
mat without pad, turn unit on and allow water
to steam until water in tank is depleted. Do
not use vinegar or other decalcifying
substances in the floor sanitizer
CAUTION
Always operate floor
sanitizer by gripping
the handle. Do not
grip by the pole.
6.
7.
water tank.
Helpful Hints
1.
2.
Always use a vacuum or sweep before
sanitizing your floors.
The easiest way to use the machine is to
tilt the handle to a 45º angle and clean
slowly 2-3 yards at a time.
4
Helpful Hints Cont.
3.
A good amount of steam passes through
the ultra-microfiber pad. We recommend
that the ultra-microfiber pad be changed
when it becomes oversaturated.
To remove stubborn stains from vinyl or
linoleum floors, pre-treat with a mild
detergent and some water before using the
floor sanitizer.
4.
Ultra-Microfiber Pads for HAAN® Floor Sanitizing Steam Mop
What is an ultra-microfiber?
An ultra-microfiber is a textile fiber that is thinner and more absorbent than a micro-
fiber (1.0dtex) pad typically used with steam mops. Specifically, to be defined as an
ultra-microfiber, it should be less than 0.2dtex. The Ultra-Microfiber pad by HAAN®
Corporation is made of .17dtex ultra-microfibers.
How to Use Ultra-Microfiber Pads
1.
2.
Please make sure that a completely dry pad is used.
As high temperature steam passes through a pad to contact the floor
to kill germs, molds, mites and to provide a certain amount of water
necessary for cleaning, it is natural that the pad gradually absorbs
moisture. After a certain length of time, the pad repels water and
becomes damp.
3.
4.
To keep the floor clean and dry, replace the pad when it is dirty.
Only remove pad from unit when not in use and steam is not being
emitted.
How to Clean and Store
1.
Hand wash or machine wash the ultra-microfiber pad in cold water
on the delicate cycle with a mild detergent. (Do not use a
fabric softener)
2.
3.
Using a washing machine may shorten the lifespan of the pads.
We recommend air drying the ultra-microfiber pad for 24 hours, but
they could be dried in a dryer on a low heat setting.
Chlorate Hanger Lightly
bleach
5
Product Assembly & Parts
A
1
Handle Assembly:
Line up groove &
insert into unit.
5
6
7
B
8
9
Base Assembly:
2
3
Insert screw as shown. Tighten using
a flat-head screwdriver. If screw
turns freely without “gripping” the
insert threads, apply additional pres-
sure when turning.
10
4
11
Floor Setting Indicator Light:
Ideal for ceramic, stone, tile and
other durable floors.
Perfect for sealed hardwood,
laminate, bamboo and other
delicate floors.
12
13
14
15
16
17
6
1.
Handle
Helpful Hint:
To extend the life of your
Ultra-Microfiber Pads,
always place your unit on
the floor protector/resting
mat while the unit heats
up. Attach the Ultra-Mi-
crofiber pad when the unit
is ready to use.
2.
Floor Setting Control
3.
Floor Setting Indicator Light
Steam Power Switch
4.
5.
Telescopic Handle
6.
Handle Length Adjustment Button
Storage Hook (rotates 360º)
Main Body Assembly Screw
Power Cord
7.
8.
Helpful Hint:
9.
When using the Floor
Sanitizer with the Carpet
Glide it will not lift all set-in
stains from your carpet,
our patented Ultra-micro-
fiber pad may be used
to act as a “blotter” for
removing most fresh, wet
spills and stains.
10.
11.
12.
13.
14.
15.
16.
17.
Water Tank Release Button
Detachable Water Tank
Power Cord Organizer (bottom)
Assembly Screw (x1) Located in Fresh Rinse Bag
Floor Protector / Resting Mat
Carpet Glide
Ultra-microfiber Pads (x2)
Fresh Rinse Lime & Scale Remover (x12)
Before Using Your Floor Sanitizer
Be sure to read ALL instructions and warnings before using
your Floor Sanitizer.
WARNINg
Your floor sanitizer is designed to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that
have been treated with wax or some no-wax floors, the sheen may be removed by
the heat and steam action. It is always recommended to test an isolated area of the
surface to be cleaned before proceeding. We also recommend that you check the
use and care instructions from the floor manufacturer.
Helpful Hint:
Helpful Hint:
When heated, never leave the ap-
pliance in one spot on any surface
for any period of time. Always
place your Floor Sanitizer on the
Floor Protector/Resting Mat when
stationary.
Always empty water from water
tank after use. To ensure opti-
mum product function use Fresh
Rinse™ once a month.
7
Before Using Your Floor Sanitizer cont.
CAUTION
Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an
ordinary extension cord.
IMPORTANT
This product is NOT for space heating purposes.
CAUTION
HAAN® floor care products emit steam at 212º to sanitize the area of use. This
means that the steam head, Ultra-microfiber pads and carpet glide get very hot
during use. Care should be taken when using this appliance and DO NOT touch
components of this machine during use except in the approved manner as outlined
in this manual.
Using Your Floor Sanitizer - Operating Instructions
1
2
3
Assemble unit and place on
Floor Protector / Resting Mat.
Press Water Tank Release but-
ton and remove water tank.
Turn Cap counterclockwise to
Remove. Fill tank with water.
4
5
6
Tighten cap. Insert tank (cap
down) until it “clicks”.
Press ON/OFF button. Wait 20
seconds for unit to heat up.
Unit may vibrate while heating.
Gently place unit on Ultra-
microfiber pad. You are now
ready to steam clean.
8
7
8
9
Tilt handle at a 45º angle. Push
and pull slowly across the floor
to clean thoroughly.
When done, push ON/OFF button.
Place unit with Ultra-microfi-
ber pad attached onto Floor
Protector / Resting Mat. Allow
to cool down for five (5) min.
10
IMPORTANT: Vibration Sound
While the unit is turned off, air builds up in the water pump
line. This is a common occurrence. When the unit is turned on
the water pump pushes air out of the line and emits a vibrating
sound. This occurs while the unit is heating up and also when
the water tank is emptied during use. If the vibration sound
persists for more than 60 seconds during heat up, check to make
sure the water tank is assembled correctly.
IMPORTANT
Always empty the water tank once you have finished using your
When unit has cooled, remove
Ultra-microfiber pad. Store
unit upright in a dry area.
Floor Sanitizer.
Floor Setting Button
Use this button to switch between two
steam levels, each catering to specific floor
types.
FLOOR
SETTING
Floor Setting Indicator Light
This light indicates which steam floor setting
level is selected.
High steam emission ideal for ceramic,
stone, tile and other durable floors.
Gentle steam emission perfect for
sealed hardwood, laminate, bamboo and
other delicate floors.
9
Using the Carpet Glide
What is the Carpet glide?
The carpet glide enables the Floor Sanitizer to freshen, deodorize and sanitize carpet-
ing, rugs, upholstery, pet cushions and more. Used with the Floor Sanitizer it kills dust
mites and other allergans on a variety of surfaces.
NOTE: The Carpet Glide is used WITHOUT the Ultra-Microfiber Pad.
To Remove
Carpet Glide
1
2
3
“Hands Free”
Removal Tab
TAB
TAB
Attach carpet glide by placing
unit under “tabs” and gently
pushing down into place.
With carpet glide attached, place
on Floor Protector / Resting Mat.
Turn unit ON and follow operat-
ing instructions to clean.
Turn unit OFF, let cool. Use
foot on “Hands Free” tab to
remove Tray from steam head.
Using the Carpet Glide - FOR FRESH STAINS
1
2
3
“Hands Free”
Removal Tab
Place unit on stain. Let stand for
a few seconds. Allow steam to
saturate stain.
Slowly move unit back and forth
over stain.
Remove carpet glide from
unit with hands free tab.
4
5
6
Gently place unit on Ultra-
10 microfiber pad.
Use the pad to rub the area
“blotting” out the stain.
Turn unit OFF. When cooled,
remove Ultra-microfiber pad.
Troubleshooting
Problem
Solution
Vibration sound last lon-
ger than 60 seconds.
• Add water to the water tank.
• Ensure that water tank is inserted correctly in unit.
• Ensure plug is set firmly in outlet.
• Replace fuse or reset breaker.
Unit not operating.
Unit does not emit steam.
Water left on floor.
• Ensure water tank is filled with water.
• Change the Ultra-microfiber pad.
• Ensure unit is always level and parallel to the floor.
White spot left on floor.
• When cleaning do not leave unit in one spot for too long.
• Use protector pad / floor mat when unit is ON and stationary.
• Use distilled water instead of hard tap water.
NOTE: To remove spot, use a damp cloth with a few drops of white vinegar
to rub and remove stain.
11
Commony Asked Questions
Q: Can the HAAN Floor Sanitizer be used on laminate flooring?
A: Yes. Your floor sanitizer was designed to be gentle on delicate flooring, yet power-
ful enough to penetrate stains and kill harmful germs and bacteria. The HAAN Select,
with 2 unique floor type settings, was designed to be safer on delicate floors than
traditional steam mops.
Q: How long can an Ultra-microfiber Pad be used until it needs to be changed?
A: The pad should be changed every 10 minutes, or when it becomes saturated with
water. The unit will become harder to push with a overly wet pad.
Q: How long does a tank of water last?
A: A full tank will last approximately 20-25 minutes. Varies upon which floor setting
you are using.
Q: Sometimes my floor sanitizer becomes hard to push - why?
A: If the unit is hard to push its likely because the Ultra-microfiber Pad is too wet or
the angle at which you are using the machine is too high.
Q: How do you use the Carpet Glide for my carpet?
A: The carpet glide is to be used without the Ultra-microfiber Pad and can be attached
directly to the unit.
Q: Does the HAAN work on pet stains?
A: Yes, the HAAN is able to spot clean fresh pet stains by loosening and lifting the
stain.
Q: How can I prolong the life of my HAAN?
A: To maintain the life of your unit, we recommend using the Fresh Rinse once a
month.
Q: Will the HAAN Floor Sanitizer clean grout?
A: Yes, but it needs a little help. If you glide your HAAN over the problem areas and
then scrub with your Ultra-microfiber Pad, it should effectively clean your grout.
Couldn’t find the Answer to your Question?
Call Customer Care at 877-HAAN DIRECT / 877-422-6347
12
To order additional pads, accessories or replacement
parts call customer care at:
877-HAAN DIRECT / 877-422-6347
Or visit:
13
Product Specifications: Model SI-60
Color
Grey and Red
Size
11.8” W x 6.8” D x 44” H (min) - 50.5” (max)
Weight
4.6 lb
Voltage/Hz
Wattage
AC 120V, 60Hz
1200 watts
Cord Length
Tank Capacity
Heat-up Time
Operating Time
25 Feet
11.83 oz.
20 sec.
Up to 25 min. dependent upon steam setting
*Dimensions approximated. Dimensions include base and measured without hose, or attachments.
One-Year Limited Warranty
Your HAAN® Floor Sanitizer is warranted to be free from defects in material and work-
manship for a period of one (1) year from the date of purchase when utilized for
normal household use by the original purchaser only. The included Warranty Registra-
tion Card should be filled out and returned within thirty (30) days of purchase. This
will register your product. Should any defect covered by the terms of the limited warranty
be discovered within one year, HAAN® Corporation will repair or replace the defec-
tive part, provided the unit is returned by the original purchaser, freight prepaid,
to: HAAN® Corporation, 1866 Colonial Village Lane, Lancaster, PA 17601. Proof of
purchase is required and should accompany the return.
The liability under this warranty is limited solely to the cost of the replacement parts
or the complete unit at our option. Labor charges are not included.
This warranty is extended to the original purchaser of the unit and excludes all other
legal and/or conventional warranties. The responsibility of HAAN® Corporation, if
any, is limited to the specific obligations expressly assumed by it under the terms of
the limited warranty. In no event is HAAN® Corporation liable for incidental or conse-
quential damages of any nature whatsoever. Some states/provinces do not permit the
exclusion or limitation of incidental or consequential damages, so the above may not
apply to you. This warranty gives you specific legal rights which vary from state to
state or province to province.
ImPoRTAnT: Before packing be sure to attach a tag to item with your name, complete
address, phone number and a note giving purchase information, model number and
what you believe to be the problem with the item. Carefully pack item to avoid damage
in shipping. To expedite your repair, we request that you call Customer Care to report
the problem prior to shipping your product back. We also recommend that you insure
the package (as damage in shipping is not covered by our warranty). mark the outside
of your package “ATTEnTIon CUSTomER CARE.” We are constantly striving to improve
our products; therefore, the specifications contained herein are subject to change with-
out notice.
Warranty Notice: FAILURE TO COMPLETE AND RETURN THE PRODUCT
REGISTRATION CARD WILL NOT DIMINISH YOUR WARRANTY RIGHTS.
(Fold here and tape closed before mailing)
Place
Stamp
Here
Product Registration
®
HAAN Corporation
1866 Colonial Village Lane
Lancaster, PA 17601
|