LED LCD TV RECEIVER
USER MANUAL
MODEL:
Please read this manual carefully before using
your television and keep this manual in a good
place for future reference.
LET26C430
LET32C430
Thanks for buying this 26"/ 32" LED LCD TV. This guide will help you set up and begin using your TV.
26" Full HD 1080P Digital LED LCD TV
Remote control
AAA battery x2
Instruction Manual
Quick start guide
Scart cable x1
32" HD Ready LED LCD TV
Remote control
AAA battery x2
Instruction Manual
Quick start guide
Scart cable x1
Adaptor
Adaptor
P.02
SAF ETY NOTICE
"
"
"
"
"
"
For your protection,please read these instruction completely and keep this manual for future reference.
Please ensure that the set has adequate ventilation.
Do not place the set near a heat source or in direct sunlight.
Do not put the unit near water or oil as it may cause a fire.
During thunderstorms, unplug both the antenna and power plug to prevent damage.
Do not use a damaged power plug or put the power supply near a heat source as it may cause electric shock or
fire.
"
"
"
To prevent potential frie, do not overload an electrical outlet with too many plugs.
Place the set on a level surface to prevent it from tipping and potential damage.
Do not remove the cover of the set or try to service your TV. This may result in electrical shock or fire. All service
work must be completed by an authorised technician.
"
If there are any abnormal sounds or smells from the unit, unplug it immediately and contact an authorised
service provider.
"
"
"
To prevent fire, do not use or store any flammable materials near the unit.
To prevent fire, do not place the unit near a damp wall.
To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any
power lines.
"
"
"
Do not plug/unplug the unit while your hands are wet. This may cause an electric shock.
Please ensure a solid connection with the AC wall socket in order to avoid shock and potential fire.
To prevent electric shock or fire, please prevent rain from entering the set along the wire connected to the outside
antenna.
"
"
"
When cleaning, please unplug the unit. Use a soft cotton cloth. Do not use any abrasive cleansers, and prevent
water from entering the set.
If any plugs or input wires are dirty, unplug the set and clean them. This will prevent the risk of electric shock or
fire.
If the set is not going to be used for an extended period, unplug the unit from the main power.
The apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should
be placed on the apparatus.
The mains plug is used for disconnecting the device, make it easily accessible.
Do not use any accessories that are not reCommendedby the manufacture.
P.03
WARNINGS AND CAUTIONS
Warning
Caution
High voltages are used in the operation
of this television receiver. Do not remove
the cabinet back from your set. Refer
servicing to qualified service personnel.
Do not trap the power supply cord under
the television receiver.
Caution
Never stand on, lean on, or suddenly push
the television or its stand. You should pay
special attention to children. Serious injury
may result if it should fall.
Warning
To prevent fire or electrical shock
hazard, do not expose the television
receiver to rain or moisture.
Caution
Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to
an individual , and damage to the
television, may result if it should fall.
Warning
Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.
Caution
When the television receiver is not
used for an extended period of time, it
is advisable to disconnect the AC power
cord from the AC outlet.
Dim:515*320mm(不
包
括
底
座
）
Caution
Do not block the ventilation holes in the
back cover. Adequate ventilation is
essential to prevent failure of electrical
components.
Caution
If the television is to be built into a
compartment or similar enclosure, the
minimum distances must be maintained.
Heat build-up can reduce the service life of
your television, and can also be dangerous.
P.04
02 Introduction
INSTALLATION
CAUTION
*Locate the TV in the room where light
does not strike the screen directly.
*Total darkness or a reflection on the
picture screen can cause eyestrain. Soft
and indirect lighting is recommended for
comfortable viewing.
*Allow enough space between the TV and
the wall to permit ventilation.
*Avoid excessively warm locations to
prevent possible damage to the cabinet or
premature component failure.
Never tamper with any components inside
the TV, or any other adjustment controls
not mentioned in this manual. All LED-TVs
are high voltage instruments. When you
clean up dust or water drops on the LED
PANEL or CABINET, the power cord should
be pulled out from the receptacle, then
wipe the TV with a dry soft cloth. During
thunder and lighting, unplug the power cord
and antenna cord to prevent damage to
your TV. All repairs to this TV should only
be performed by qualified TV service
personnel.
*Do not cover the ventilation openings
when using theTV.
Main features
① Used as Television, display terminal,
3
4
5
HDMI interface and SCART Interface；
PC display；
NICAM；
② High luminance, wide viewing
Angle；
Time shift
Main parameter
Panel
26"
32"
PAL-B/G、I、D/K
SECAM- B/G、D/K、L、L
TV System
'
Video Signal System
Input Power Voltage
Power consumption
Audio Output Power （THD 7%）
Signal Input
PAL/NTSC/SECAM
100-240V~ 50/60Hz
55 W
75 W
2x8W
2x5W
Analog RGB(PC)x1
PC Audiox1
High-Definition Multimedia Interface (HDMI)x2
Video Input x1
CVBS Input x1
YPbPrx1
Mini Scart x 1
USB x 1
CI x 1
Tuner x 1
CompositeVideoinput >=350
Horizontal definition（TV line）
YPbPr
>=400
P.05
PC
PRESET MODE
V.Freq.(Hz)
H.Freq.(KHz)
RESOLUTION
1
2
3
800*600
60
37.88
640*480
60
60
31.47
48.36
1024*768
4
1360x768
60
60
60
47.7
5
6
1280x1024
63.98
66.64
1920x1080
(Only for 26")
P.06
STAND INSTALLATION GUIDE
This STAND INSTALLATION GUIDE is provided to help you easily install the stand. Please carefully
follow step 1 through Step 2.
Open the box and find the parts
1 Open the box and find the following parts.
Screws
-
-
Stand x1 pc
Packing
Screws x 4 pcs
Stand
TV
Stand
Packing
Place the stand on the TV
1. Insert the stand support pillar into the
stand as the arrow indicated direction,
and then fastened with three screws.
2
2. Insert the stand Ass'y into back cover
as the arrow indicated direction,
and then fastened with one screw.
P.07
WALL MOUNTING INSTALLATION GUIDELINES
Wall Mounting Holes Spacing and Location
200.00
4 Wall mount M4 Screws
1.Use the screwdriver to remove 1 screws from the screw location.
2.Remove the base stand from the Main body.
P.08
Front control panel
SOURCE
MENU
CH+
CH-
VOL+
3
VOL-
1
2
STANDBY
SOURCE
MENU
CH+/CH-
Display the input source menu.
Display main MENU.
In TV mode,press CH+ or CH- to change
the channel up and down.
In MENU, press CH+ or CH- to select items .
In standby mode, it can Turn on the TV.
Adjust sound level.
1
2
3
1
Remote control sensor.
Indicator LED:
Blue:POWER ON. RED STAND BY.
Key board.
2
3
VOL+/VOL-
STANDBY
4
5
In MENU,adjust the item that you Selected.
Rear/Side Sockets
AV
L
R
Y
Pb
Pr
HDMI2
AC-INPUT
100-240V~ 50/60Hz
3
1
2
4
5
COMMON INTERFACE (CI)
SCART
USB
HDMI1
PC AUDIO
VGA
ANT
10
11
12
6
7
8
9
input
input
input
input
input
input
AV
USB
PC AUDIO
COMMON INTERFACE(CI)
SCART
input
1
2
3
4
5
6
7
8
9
10
L/R AUDIO
AC Power Source
YPbPr
HDMI2
HDMI1
input
Intput
Intput
Input
input
11 VGA INPUT
ANT
12
P.09
P.10
COMMON INTERFACE
The common interface (CI) slot is designed to
accept the conditional Access (CA) Module
and Smart card in order to view the pay TV
programmes and additional services.
Contact your Common Interface service
provider to get more information about the
modules and subscription.
Please noted that CA modules and smart
cards are neither supplied nor optional
accessories from us.
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
Software Update(OAD)Off
CHANNEL
<
>
Software Update(USB)
P.11
03 Remote control
1:POWER:To set the TV to standby or power on.
POWER
MUTE
2:NUMERIC KEY:For direct access to channels.
3:TV MENU:To display TV menu.
4:CURSOR:To move within the menu.
5:CH.LIST:To display the channels list.
6:VOL+/- :To adjust sound level.
7:PIC:To switch picture mode.
13
14
15
1
2
AUDIO
1
4
2
5
8
3
6
9
RECALL
7
0
8:SLEEP:Set timer to turn off the TV.
9:FREEZE : To freeze the picture.
10:EPG:To display information about the
program being viewed and what's on next in
DTV mode.
11:FAV:To access your favourite channels list
in TV or DTV mode.
TV MENU
SOURCE
16
17
3
4
OK
18
19
5
6
12:TELETEXT KEYS: Please refer to next page.
13:MUTE:To disable or enable the sound output.
14: AUDIO:To select the available audio
/language of TV programs .
CH.LIST
+
SOUND
PIC
EXIT
+
20
VOL
_
CH
_
15: RECALL: To access the previously viewed
channel.
7
8
SLEEP
ASPECT
21
22
16: SOURCE: To select input source.
17: OK:To confirm selection.
FREEZE
TV/RADIO
FAV
TEXT
INFO
23
24
9
18: EXIT:To return to the previous menu
or exit menu.
EPG
10
11
19: SOUND:To switch sound mode.
20: CH+/CH-:To access the next or previous
channels.
REVEAL
HOLD
LIST
MIX
INDEX
12
SUBPAGE
SIZE
SUBTITLE
21: ASPECT: To change picture aspect ratio.
22:TV/RADIO:In DVB mode, it is used to switch
between digital TV channels and radio
stations. Display/remove the programme
information.
25
26
30
31
REC/REP
27
28
32
33
23: TEXT:To enter or exit TELETEXT.
24: INFO:To display information about the
channel being viewed or further information
about the program when in small EPG
screen in DTV mode.
25: SUBTITLE:To switch between different
subtitles in DTV mode.
29
26. To skip to the next file in USB mode.
27. To skip to the previous file in USB mode.
28. REC/REP:Press to record the TV program you
are watching in DTV Mode or press to repeat play
in USB Mode.
29. Stop the media player in USB mode.
30. To scan in reverse, during USB, USB playback.
31. To scan in forward, during USB, USB playback.
32. Play the media player in USB mode.
33. Pause the media player in USB mode,time shift
in DTV mode.
NOTE:
With no operation for 4 hours, the unit will swift into
the standby mode automatically.
P.12
REMOTE CONTROL
TELETEXT
Teletext is an information system broadcast by certain channels which can be
consulted like a newspaper. It also offers access to subtitles for viewers with hearing
problems or who are not familiar with the transmission language(cable networks,
satellite channels, etc.)
Press:
You will obtain:
This is used to call or exit teletext modes. The summary appears with
a list of items that can be accessed. Each item has a corresponding
3 digit page number. If the channel selected does not broadcast
teletext, theindication 100 will be displayed and the screen will
remain blank (in this case, exit teletext and select another channel).
TEXT
Enter the number of the page required using the 0 to 9 up/down.
Example: page 120, enter 120. The number is displayed top left, the
counter turns and then the page is displayed. Repeat this operation to
view another page. If the counter continues to search, this means
that the page is not transmitted. Select another number.
SELECTING A PAGE
Coloured are as are displayed at the bottom of the screen. The 4
coloured keys are used to access the items or corresponding pages.
The coloured areas flash when the item or the page is not yet
available.
DIRECT ACCESS
TO THE ITEMS
This returns to the contents page (usually page 100).
INDEX
Certain pages contain sub-pages which are automatically
displayed successively. This key is used to stop or resume sub-
page acquisition. The indication appears top left.
SUB PAGE
HOLD
To freeze the page.
To display or hide the concealed information (games solutions).
REVEAL
The user can set four favorite pages to be directly linked to the four
color keys. While list mode is activated, it is not possibility to use TOP
or FLOF navigation with the colorkeys. The favorite page numbers
should be stored and restored to/from nonvolatile memory for each
channel by the system software.
LIST
P.13
04 OPERATION
Installation Guide
Tune Type
Germany
DTV+ATV
Norway
Please select an OSD Language
Italy
Luxembourg
Netherlands
Greece
Poland
Cesky
English
Magyar
Polski
Hrvatski Nederlands Portugues
ka Italiano Norsk
Pycck
Fran ais
~
Hungary
Portugal
Espanol
Dansk
Deutsch
MENU
E
OK
Pls press
to select country at first , then
press OK button to start auto tuning .
Mode Select
Channel Tuning
Home Mode
Shop Mode
TV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
Data: 0 Programme(s)
OK
96% UHF CH 68 DTV
Country
NOTE:
Norway
Rumania
Slovenia Switzerland Morocco
All the channels including ATV, DTV and Radio
can be tuning by one time,if the Tune Type is
DTV+ATV .
All the stored channels will be disappear after
auto tuning .
Spain
Poland
Russian
Serbia
UK
Tunis
Portugal
Algeria
Sweden NewZealand
OK
After auto tuning , the channel will skip to
the first DTV channel.
This screen only appear when the TV first time
turn on or reset to factory set.You can choose
language,energy-saving mode and country,
auto tuning programs .And after tuning the
screen will skip to the first DTV program.
2).DTV Manual tuning:
You can select a DTV channel then find the
program in this channel.
Pls press
to select the channel , then press
1.CHANNEL MENU
The first item of the MENU is channel menu( for
TV or DTV source only).
OK to search the programs .
NOTE:
Bad Normal Good means signal intensity.
DTV Manual Tuning
_
Auto Tuning
VHF CH
5
+
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
CI Information
Software Update(OAD)Off
CHANNEL
<
>
Software Update(USB)
Press OK to search
Nomal
Bad
Good
You can search channels and edit programs here.
1).Auto tuning:
3). ATV Manual tuning :
Search all the channels automatically(you can
select ATV and DTV)
You can change the sound system to search
the analog TV channels and fine tune the
channels , then storage the channels you
selected.
P.14
Once your favorite group is created, you can
press the FAV key to quickly access your favorite
channel.
5). CI information: (optional)
This menu can display the CI card' s information.
ATV Manual Tuning
_
Storage To 1
System BG
+
Current CH 1
Search
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as
contrast, brightness, etc.
Fine-Tune
Press OK to move, press OK to adjust.
Frequency 255.25 MHz
MENU
Save
Picture Mode Standard
Color Temperature
Aspect Ratio
Noise Reduction
Screen
NOTE:
PICTURE
<
>
Press teletext red button to storage to channels
after manual tuning .
4). Program edit:
Color Temperature
Medium
You can Delete ,Rename ,Move, Skip , FAV any
programs.
Picture Mode
Standard
Contrast 82
Brightness 50
Red 40
Green 31
Blue 50
Delete
Color 50
Sharpness 50
Press teletext red button , the program in cursor
will delete.
Tint 50
MENU
MENU
Rename:
NOTE:
1).Tint is available in NTSC system only.
2).There are four colors temperature modes
can be selected medium, warm, cool,user
3).Screen is available in PC mode only which
can adjust Horizontal position, vertical
position, size and phase.
Only can rename ATV programs .
Move the cursor to the program, press teletext
green button to rename the program.
Press
to choose the character. Press
to
move the cursor .
Press MENU button to exit edit , Press EXIT to
exit the menu.
Note: ATV programs name only can be 5 character,
DTV programs name can be 25 character.
3.SOUND MENU
The third item of the MENU is the SOUND
MENU.
You can adjust the sound effect here such as
treble, bass, balance etc.
Use the Arrow Buttons to select the channel you
wish to move. Then press the Yellow Button to
select Move function. Once active, enter the
number button and then press OK to confirm.
Press
to move, press OK to adjust.
Sound Mode Standard
Balance
Auto Volume
Press
to choose the program , press teletext
SOUND
<
>
blue button to skip this program, The
show on the right side of the program .
will
Choose the skipped program, press blue button
again , you can cancel the skip ,The
disappear .
will
Note:
Auto volume: only available when the input
signal volume is too large or distortion.
Favourite
4.TIME MENU
Press
to choose the program , press FAV
button , it will show
on the right side of the
The forth item of the menu is the TIME MENU
You can adjust the clock, power on/off time,
program.Choose the FAV program , press
FAV button again , you can cancel the FAV,
the will disappear .
sleep time etc Press
adjust
to move, press OK to
P.15
NOTE:
The default pass word is 0000, If you forget the
password, you can use the super password:9443.
Clock -- -- -- --
Off Time
Block program: Press
to choose the
On Time
program ,press teletext green button to block
the program. If you want unblock the program,
pls enter the main menu , input the password,
then press green button again.Parental
Sleep Timer
TIME
<
>
Auto Sleep
Time Zone
guidance: Press
to choose rating.
NOTE:
Within 15 minutes there is no signal, the TV
will auto sleep , if Auto Sleep is set ON. The
clock time can get from the DTV system auto.
7.EPG Menu(Electronic Program
Guide).
The EPG menu is used to look at what is being
broadcasted on DTV or Radio channel in the day.
To access the EPG menu, press the EPG
botton,the following menu will be displayed:
5.OPTION MENU
PROGRAMME GUIDE
TIME
The fifth item of the MENU is the OPTION
MENU. You can adjust the Menu language,
Audio language,Subtitle language etc.
28 Apr 04:39
800 SZTVM01
801 SZTVM02
802 SZTVM03
803 SZTVM04
804 Date
No Information
No Information
No Information
No Information
No Information
OSD Language English
Audio Languages UK
Subtitle Languages UK
Country UK
Record
OK
INFO
Schedule
Remind
INDEX
PVR File System
Restore Factory Default
OPTION
<
>
INFO
1.
Use
to choose the programs , Press
INFO key, you can display the highlight program's
information.
In PVR File system menu you can set up USB
disk for PVR.
Schedule
Press the teletext yellow key, It can list
2.
Select Disk
C:
all the reminder schedule, press
to choose
Check PVR File System Start
the list, press red key
schedule list.
to delete the
DELETE
USB Disk
Format
Schedule List
04:55 28th Apr
Delete
Time Shift Size
Speed
Programme Title
Time Date
Channel Name
Free Record Limit 6 Hr.
NOTE:
Restore factory default will clear all the programs
and password.
3.
Record
Press the red key ,It can set the program
to be recorded.
6.LOCK MENU
The sixth item of the menu is the LOCK MENU
You can lock system, set password, block program
and set parental guidance Once you set the lock
system on you can not search the channels or
change any programs.
Remind
4.
Press the blue key to choose one program
and set up one reminder time, the TV screen will
skip to the choosed program in the reminder time
automatically.
Lock System
Set Password
Block Program
Reminder setting
_
802 SZTVM03
+
08 Minute
05 Hour
Parental Guidance Off
LOCK
<
>
Apr Month
28 Date
Once Mode
OK
BACK
P.16
8.PVR function
1.Prepare to record the program
From OPTION MENU enter into PVR File
System in “OPTION MENU”, please
choose “check PVR File System”. Click
“OK”, until “checking”change into
“Success”.
Note: please check the term “speed”. If it
is “HD support”, that means the speed of
USB device is available for time shift and
record. If not, please format the device, to
make sure the device available. The default
“Free Record Limit”is 6 hour, if the space
on the disk is big enough. If the space is not
big enough, the record time should be
shorter, depends on the room on the
device. During the “check PVR File
System”checking, please do not take any
other operation until it finished.
Select Disk
C:
Check PVR File System
Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit
OK
6 Hr.
MENU
Select Disk:select which disc to save the
record file.
Select Disk
USB
Disk
0
The recordings have to be done with TV PVR
system. It can only be played in the same TV,
not in other kind of devices (computer, DVD,
etc...) which doesn't be compatible with .TS.
Format.
C:
See that in order to carry out any kind of
recording, the TV will oblige you to format the
connected device to store the recording.
Check PVR File System: check if the PVR File
System set up in the USB device or not.
WARNING. WHEN YOU FORMAT, THE
EXTERNAL DEVICE WILL LOSE ALL THE
FILES AND INFORMATION YOU STORAGE
IN THE DEVICE.
Format:
From OPTION MENU enter into PVR File
System as below:
File System Size
PVR File System Type Hi Speed FS
OSD Language
Audio Languages
Subtitle Language
English
PVR File System Size
SD 104 Mins
All
Country
PVR File System
Restore Factory Default
UK
HD 29 Mins
OPTION
<
>
MENU
File System Size
PVR File System Type
PVR File System Size
SD 104 Mins
FAT32
All
HD 29 Mins
OK
P.17
2.Record the program
(Suggest to format the device by
“High Speed Fs...”, which can speed up
the record.)
As playing the DTV source, choose the
channel and click “record”, the record
frame will pop up. Click “record”again,
the record frame will disappear and the
“REC”icon still on the left top. It will
disappear until you click “stop”.
Format disk
Format disk
Warning! All data will be lost.
3.Play the record
Start
Exit
In “USB”, the record program will be
saved in the folder “_MSTPVR”on the
device.
Format disk
Do not unplug USB device.
Formatting,please wait
1. The USB storage size needs to be the
size between 4GB to 500GB.
2. Video may become pixelated when Video
bit rate is too low.
3. Not all USB devices are compatible.
Below is a list of recommended USB
drvies.Models that are not listed may be
compatible, but it is not guaranteed to work.
below menu appear after Format finish:
Select Disk
C:
Check PVR File System
Checking
The USB support list are the same as
Timeshift function ,see page 20.
USB Disk
Format
Pass
Pass
Time Shift Size
Speed
All
Checking
Free Record Limit
MENU
6 Hr.
Select Disk
C:
Check PVR File System
SUCCESS
USB Disk
Pass
Pass
All
Format
Time Shift Size
Speed
Free Record Limit
MENU
HD support 2048 KB/s
6 Hr.
If you select the “Hi Speed FS ”format mode,
then you can change the time shift size:
Time Shift Size
Time Shift Disk Size
SB 14 Mins
512 MB
HD
4
Mins
P.18
9.Timeshift function
1.Prepare to record the program
00:00:33/00:04:22
Stop
This TV allows you to pause and record the
currently watched digital program to a USB
storage device, and to resume to the point
where it was paused.
Play
FB
FF
Prev.
Next
Pause
NOTE:
NOTE:
Formatting a USB 2.0 storage device will
be needed. Save your original data
before formatting. All the data stored in
the USB device will be erased after
formatting.
Please do not unplug the USB storage
device when the Time Shift function is
activated.
Approximately 4GB of memory buffers
about offer 140 minutes.
USB Drive Storage Format
Select to format the USB device and
allocate the amount of space for the Time
Shift function.
NOTE:
The format process will take at least 2
minutes. Please do not turn off the power
or remove the USB device during
formatting.
During formatting, a speed test will be
done on the USB device. If it fails, it
means the USB device may not support
the Time Shift function.
Record a paused DTV program to
USB storage device
1. While in the DTV input source, insert
USB storage device to the USB port on the
side of your TV.
2. Press PAUSE 33 to start Time Shift
function. The TV program paused. The Time
Shift OSD appears, and starts recording.
3. Press STOP 29 to stop Time Shift
function and stop recording program.
SUBPAGE
SIZE
MIX
SUBTITLE
REC/REP
29
33
P.19
Time Shift limitations:
1. When the Time Shift feature is activated,
only the PLAY/PAUSE/STOP/FWD/REV/
VOL+/VOL-/MUTE keys and some basic
operation keys (ENTER/EXIT/navigation
keys) are available.
2. Video playback may not be smooth and
skip if USB recording speed does not meet
the minimum requirements .
3. Do Not remove USB disk or switch off the
power during Time Shift operations. It will
abort once the signal is lost.
4. Do Not remove the signal source during
Time Shift operations.
5. Do Not quickly and repeatedly change
operations between
PLAY/PAUSE/FWD/REV.
6. Video may become pixelated when Video
bit rate is too low.
7. Not all USB devices are compatible, The
USB hard disk drive electricty should be
< 500MA.
Below is a list of recommended USB drvies.
Models that are not listed may be
compatible, but it is not guaranteed to work.
8. This feature is not available for all digital
TV,such as scrambled or audio only
channels.
P.20
10.USB Player
00:00:33/00:04:22
Press source key, and selsct USB in soure
list, press OK button to enter the USB menu.
Info.
Pause
FB
FF
Prev.
Next
Stop
Repeat ALL
Press
to select the function icon, press OK
USB 2.0
button to confirm the function.
Press
NOTE:
or EXIT button to exit the control bar.
You can adjust the audio track, or program in the
Info menu while Playing the video file.Choose the
Info icon and press OK can display the Info MENU.
PHOTO
MUSIC
MOVIE
TEXT
Sample1.ts
Resolution: 720x576
Please make sure that the USB device have
plugged in the slot.There are four type media
item can be selected, such as photo, music,
Movie, and text. Select the type media item by
AudioTrack:
Subtitle:
1/2
1/1
1/6
pressing
, press OK button to enter
Program:
the disk selection menu.
Size:
30574 KBytes
1/1
Close
Return
C
Press the
to select the right disk and press
OK to display media files and folder list or
choose Return to back to the media type
selection menu.
1/1
Resolution: 688x412
AudioTrack: 1/2
Return
Movies
Subtitle:
1/1
1/5
Program:
Size: 511457 KBytes
Sample1.ts
Sample2.ts
Sample3.ts
Sample4.ts
Select the media file by pressing
or
, then
the preview frame will pop up.Press the button
to play the media file in full screen.When the
media file (photo,music, Movie, or text type) is
playing, press the OK or Info button can display
the control bar.
P.21
05 Trouble shooting
Trouble phenomenon Symptom
Inspection Check
Picture
Audio
antenna position, direction
or connection
Snow
Ghost
Noise
Normal audio
Noise
antenna position, direction
or connection
electronic equipment,car/
motorcycle,fluorescent light
Interference
Volume(check if mute is
activated or if the audio system
connections are not correct)
Normal Picture
Mute
Power cord is not inserted
Power switch is not opened
Contrast and brightness/volume
setup
No picture
No colour
Mute
Press standby key on the remote
control for inspecting
Normal audio
Colour control
retune channel
Picture
breaking up
Normal audio
or weak
No colour
TVsystem
Noise
P.22
Specification
Colour system
PAL-B/G, I, D/K
'
SECAM-B/G, D/K, L, L
Sound system
Video input
BG, DK, I, L,L'
SCART, YPbPr,AV,
VGA, HDMI, USB.
480i/p, 576i/p,
720p, 1080i, 1080p
Y/Pb/Pr
HDMI
480i/p, 576i/p, 720p, 1080i, 1080p
AC 100-240V 50/60Hz
Power
requirements
Power
55W(26")
2x5W
75W(32")
2x8W
consumption
Audio output
Working temperature:
+5 C - +35 C
Working humidity:
20% - 80%
Storage temperature:
-15 C - +45 C
Environment
conditions
Storage humidity:
5% - 90%
User manual
Remote control
Battery (x2)
Accessory
Quick start guide
* The part specifications of this TV set provided here are for reference only.
Difierences may occur as product technology is updated.
Design and specifications are subject to change without notice.
P.23
|