Halo Lighting System TV Cables L904 L User Manual

®
HALO  
L905  
T Connector  
L904  
L Connector  
To connect three track sections into a T  
configuration. Field adjustable for either right  
hand or left hand application. May be used as  
feed point.  
To connect two track sections at a right angle.  
Field adjustable for either right hand or left hand  
application. May be used as feed point.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L906  
X Connector  
L907  
Outlet Box for use with  
T-Bar ceiling  
To connect four track sections into a cross  
configuration. May be used as feed point.  
L901, L903, L904, L905 or L906 connector also  
required. 4”x 4” x 1 1/8”.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L908  
Mini Joiner  
L909  
Floating Canopy and  
Connector  
A low profile connector to cleanly and crisply  
join two straight track sections end-to-end.  
(Note: The L908 is not a feed point).  
Track can be connected to existing outlet  
box located anywhere along the track. Comes  
with canopy cover, connector, dead-end and  
mounting hardware. 4 1/8” x 4 1/4” x 1 3/8”.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L950  
Cord and Plug Connector  
L951  
Wire Way Cover for Pendant  
Assembly Kit  
12’ three-wire cord with grounded plug.  
Maximum capacity 10 AMP  
For track to be wired through stem (order one  
for each feed point used). Shown with end  
feed and pendant stem kitorder separately  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L979  
Conduit Continuation Kit  
L980  
Live End Conduit Adapter  
Consisting of one left feed and one right feed.  
To continue a run around obstructions. Designed  
to accept 1/2” trade size conduit fitting (not  
included).  
Designed to accept standard 1/2” trade size  
conduit fitting (not supplied). Use when  
feeding to track through surface conduit  
system.  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
L983  
T-Bar Attachment Clip  
L992  
Pendant Kit Assembly  
Allows track to be attached to inverted tee ceiling.  
Order as follows: 2 kits for 2’ Trac; 2 kits for 4’  
Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac.  
Order 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits  
for 8’ Trac; and 4 kits for 12’ Trac. Includes one  
18” threaded steel stem, canopy and mounting  
hardware.  
L986  
Mini-T Bar Clip  
L48  
48” Steel Stem  
For mounting Trac on suspended ceilings with  
mini-grid (9/16” wide) system.  
For additional length with L992. Can be field cut.  
Finish: White (P), Black (MB)  
L994  
45° Pendant Adapter  
DE600 Dead End  
For installing pendant mounted Power-Trac on  
sloped ceiling. For use with L992 and L993.  
Replacement Dead Ends for Single Circuit Track  
(6 included)  
Finish: White (P), Black (MB)  
Finish: White (P), Black (MB)  
COOPER LIGHTING  
311  
 

Grizzly Sander G0574 User Manual
Hamilton Beach Griddle 840112100 User Manual
HANNspree Flat Panel Television MAK 000011 User Manual
Harbor Freight Tools Brush Cutter 95343 User Manual
Harbor Freight Tools Hair Clippers 96822 User Manual
Harbor Freight Tools Impact Driver 94855 User Manual
Harbor Freight Tools Juicer 03707 User Manual
Harbor Freight Tools Welder 55525 User Manual
Hasbro Robotics 81398 User Manual
Ide Line Vacuum Cleaner 740 108 User Manual