6” PVC DIAL CALIPER
Model 92953
OPERATING INFORMATION
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
©
®
Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
9.
DO NOT APPLY FORCE OR A SHOCK TO THE CALIPER.
DO NOT DISASSEMBLE THE CALIPER.
UNPACKING
10.
When unpacking, check to make sure that the product is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as
soon as possible.
OPERATING INSTRUCTIONS
To Prepare The Caliper For Use:
1.
2.
4.
5.
6.
Make sure the upper and lower Outside Diameter Jaw surfaces are clean.
Close the Outside Diameter Jaws completely but gently.
At this point, the Slide Scale Measurement Point should read “0”.
Set the Dial by turning the Dial Adjustment until the Dial Needle points to “0”.
The Caliper is now ready for use.
To Read The Scale And Dial:
1.
2.
3.
The Beam Scale Measurement Point features readings in inches.
The Dial features readings in inches.
First, read the Slide Scale Measurement Point (in inches and tenths of inches),
i.e., 0.5”. Then, read the Dial Needle on the Dial (in 1/128”), i.e., 2/128” or 1/64”.
4.
Combine the two measurements for the final reading, 33/64” (1/2” + 1/64”).
To Use The Caliper:
1.
2.
To measure the outside diameter of an object see Figure B.
To measure the inside diameter of an object see Figure C.
FIGURE B
FIGURE C
SKU 92953
For technical questions, please call 1-800-444-3353.
Page 3
3.
4.
To make a step measurement of an object see Figure D.
To measure the depth of an object see Figure E.
FIGURE E
Actual product may vary slightly from illustrations.
FIGURE D
LIMITED 90 DAY
WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and
durability standards, and warrants to the original purchaser that this product is free from defects in
materials and workmanship for the period of ninety days from the date of purchase. This warranty
does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents;
repairs or alterations outside our facilities; or to lack of maintenance. We shall in no event be liable
for death, injuries to persons or property, or for incidental, contingent, special or consequential
damages arising from the use of our product. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation of exclusion may not apply to you.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the
merchandise. If our inspection verifies the defect, we will either repair or replace the product at our
election or we may elect to refund the purchase price if we cannot readily and quickly provide you
with a replacement. We will return repaired products at our expense, but if we determine there is no
defect, or that the defect resulted from causes not within the scope of our warranty, then you must
bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from
state to state.
3491 Mission Oaks Blvd. • P.O. Box 6009 • Camarillo, CA 93011 • (800) 444-3353
REPLACEMENT PARTS ARE NOT AVAILABLE FOR THIS ITEM
SKU 92953
For technical questions, please call 1-800-444-3353.
Page 4
|