SpEcIFIcATIONS
SIT/STAND
ROLLING WALKER
Weight Capacity
225 lb.
Handle Height Adjustment 6 Positions
66838
uNpAcKING
INSTRucTIONS AND pREcAuTIONS
When unpacking, make sure item is intact
and undamaged. If parts are missing or broken,
call Harbor Freight Tools at 1-800-444-3353.
ImpORTANT SAFETY
INFORmATION
1.
2.
Assemble according to these instructions.
Improper assembly can create hazards.
WARNING! This product should only be used
by a person who has the physical capability
to safely walk and sit on this device.
3.
Do not exceed 225 lb. weight capacity. Be
aware of dynamic loading! Sudden load
movement may briefly create excess load
causing product failure
4.
5.
6.
use as intended only; Walker is not a
wheel chair. Do not use to carry people.
Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.
Make sure Walker is fully opened, Seat is
down and folding bar beneath Seat is locked
before use.
7.
8.
9.
Make sure Handles are of equal height
before use. If one is lower than the other,
adjust accordingly. Apply gentle pressure to
Handles to test Walker stability before use.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Test Brakes before use. If Wheels turn while
Brakes are locked, have an authorized tech-
nician adjust Brakes. DO NOT use Walker if
Brakes do not work properly.
SAVE THESE INSTRucTIONS.
READ ALL pREcAuTIONS
AND INSTRucTIONS.
©
®
Lock Brakes before sitting on Seat. Do not sit
on Seat unless you on even, level ground.
Copyright 2009 by Harbor Freight Tools . All
rights reserved. No portion of this document or any
artwork contained herein may be reproduced in any
shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this document
may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the
product described herein. Tools required for assembly
and service may not be included.
10. Inspect before every use; do not use if parts
are loose or damaged. Check tires regularly
and replace when worn.
11. This product is not a toy. Do not allow chil-
dren to play with or near this item.
12. Maintain product labels and nameplates.
These carry important safety information.
For technical questions or replacement parts, please
call 1-800-444-3353
9.
To loosen the brake cable, turn the Nut coun-
terclockwise.
cLEANING AND STORING
1.
2.
Clean Walker use a soft, damp cloth.
10. There may be a secondary brake cable ten-
sion adjustment that will have to be made
as well. Use a 2mm Hex Key (not included)
to loosen the set screw near then end of
the brake cable just above the Wheel. See
Figure 5, below.
Remove Basket or Bag and fold Walker. To
fold, pull on tie cord wrapped around Support
Axle (42).
3.
Store folded Walker in dry, secure area.
Record Serial Number Here:
Note:If product has no serial number, record
Wheel
month and year of purchase instead.
Note:Some parts are listed and shown for illustra-
tion purposes only, and are not available
individually as replacement parts.
Set Screw
pLEASE READ THE FOLLOWING
cAREFuLLY
THe MANUFACTUReR AND/OR DISTRIBUTOR
HAS PROVIDeD THe PARTS LIST AND
ASSeMBLY DIAgRAM IN THIS DOCUMeNT AS
A ReFeReNCe TOOL ONLY. NeITHeR THe
MANUFACTUReR OR DISTRIBUTOR MAKeS
ANY RePReSeNTATION OR WARRANTY OF
ANY KIND TO THe BUYeR THAT He OR SHe
IS qUALIFIeD TO MAKe ANY RePAIRS TO THe
PRODUCT, OR THAT He OR SHe IS qUALIFIeD
TO RePLACe ANY PARTS OF THe PRODUCT.
IN FACT, THe MANUFACTUReR AND/OR
DISTRIBUTOR exPReSSLY STATeS THAT
ALL RePAIRS AND PARTS RePLACeMeNTS
SHOULD Be UNDeRTAKeN BY CeRTIFIeD
AND LICeNSeD TeCHNICIANS, AND NOT BY
THe BUYeR. THe BUYeR ASSUMeS ALL RISK
AND LIABILITY ARISINg OUT OF HIS OR HeR
RePAIRS TO THe ORIgINAL PRODUCT OR
RePLACeMeNT PARTS THeReTO, OR ARISINg
OUT OF HIS OR HeR INSTALLATION OF
RePLACeMeNT PARTS THeReTO.
Figure 5
11. Please note: You will need to hold the brake
cable in tension by holding the cable end
with pliers. Then, while the brake cable is in
tension, loosen the set screw.
12. Once the set screw is loosened, slide the
cable clamp toward the brake lever. Then
retighten the set screw.
13. WARNING! If the brakes continue to loosen
after making these adjustment, contact
an authorized service technician to make
repairs.
14. Do NOT use Rolling Walker if Brakes do
not function properly. using the Rolling
Walker while brakes are not functioning
properly can lead to brake failure and
possible personal injury and property
damage.
SKU 66838
For technical questions, please call 1-800-444-3353.
Page 3
pARTS LIST & ASSEmBLY DIAGRAm
part
1
2
3
4
5
6
7
8
Description
Qty
part
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
Description
Qty
2
2
2
2
4
2
4
2
8
4
4
4
4
2
1
2
2
6
2
6
2
2
2
2
Dowel
Push handle
2
2
1
2
2
Brake loop pothook
Turning axles
Front fork cover
Front fork
Bearing
Locknut
Knot
Round turning axles
Bearing
Locknut
Wheel
Screw
Cotton cube for backrest
Handle
Steel break adjustment
Brake handle
Brake cable
M5 Locknut
M5*25 Round screw
M6*35 Screw
Pipe cover
Steel control brake
Star-shape screw cap
Retainer Pins
Spring
2 sets
2
4
4
2
2
2
2
2
2
1
1
1
2
6
2
14
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Washer
Support Hinges
Support axle
Support
Locknut
Washer
Axles
Washer
Screw
Brake framework piece
Spring
Seat
Front frame
Back frame
Pipe stopper
M6 Locknut
Screw
Washer
Rivet
Rope
Basket
1
1
2
Port Stopper
PVC Bag
Backrest Bar
1
1
Fastener
Round cross bolt
4
53
52
SKU 66838
For technical questions, please call 1-800-444-3353.
Page 4
|