650293-X
OPERATOR’S MANUAL
RELEASED: 2-16-94
INCLUDE MANUALS: 67072ĆX PNEUMATIC CONTROLLER ASM. (97999Ć596),
6661AXĆXĆC 1" NONĆMATALLIC DIAPHRAGM PUMP (97999Ć20)
REVISED:
(REV. C)
9-15-00
650293-X METERING SYSTEM
USING 1” NON-METALLIC DIAPHRAGM PUMP
(PNEUMATIC COUNTDOWN TYPE)
The 650293ĆX Series of Special 1" Diaphragm Pumps are similar to
Standard Models of 6661AXĆXXXĆC Diaphragm Pumps.
A 6661AXĆXĆC Operator's Manual is to be used for General InformaĆ
tion, Installation, Operation, and Maintenance.
FLUID SERVICE DISP./ CYC
MODEL
650293Ć1
650293Ć2
BASIC PUMP
6661A3Ć344ĆC
6661A3Ć3EBĆC
KIT
GAL. (CC)
.165 (624)
.170 (643)
637161Ć44ĆC
637161Ć44ĆC
Special Models and their Standard Model counterpart are shown in the
chart. Refer to the standard 6661AXĆXĆC Operator's Manual for SerĆ
vice Kits and other information.
USE SERVICE KIT 637118ĆC FOR AIR SECTION REPAIR
Special parts involved in the model are shown below.
GENERAL DESCRIPTION
OPERATION
The Pneumatic Controller Asm. provides logic control for preset disĆ
pensing. When installed on a diaphragm pump it can monitor the diaĆ
phragm pump pulse or cycle and to allow the user to accurately control
the number of cycles the pump will produce. This will effectively allow a
preset and repeatable amount of material to be dispensed through the
pumping system.
REFER TO 67072 PNEUMATIC CONTROLLER MANUAL FOR OPĆ
ERATION
NOTE: For best results operate the pump at 30 Ć 90 PSI (2 Ć 6.2 bar).
Fluctuations in the air pressure can affect the displacement per cycle.
Once the desired displacement is achieved, keep the air pressure as
constant as possible.
FLUD UTLT
67072 PNEUMATIC CONT
650293ĆX PUMP
SEECHART ABOVE
AIR INLET
FLUID INLET
SPECIAL PARTS
93911 ADAPTER PLA
PN 97999Ć598
INGERSOLL-RAND COMPANY
P.O. BOX 151 D ONE ARO CENTER D BRYAN, OHIO 43506Ć0151
&
(419) 636-4242
D
FAX (419) 633-1674
E2000 D PRINTED IN U.S.A.
|