Kenwood Food Processor FP120 Series User Manual

FP120 series  
 
before using your Kenwood appliance  
Read these instructions carefully and retain for future reference.  
Remove all packaging and any labels.  
before plugging in  
Make sure your electricity supply is the same as the one shown  
on the underside of your appliance.  
G
G
G
a
Important – UK only  
safety  
G
The wires in the cord are coloured as follows:  
Blue = Neutral, Brown = Live.  
The appliance must be protected by a 3A approved (BS1362)  
fuse.  
G
The blades and plates are very sharp, handle with care. Always  
G
G
hold by the finger grip at the top, away from the  
cutting edge, both when handling and cleaning.  
Do not lift or carry the processor by the handle - or the handle  
may break resulting in injury.  
Always remove the knife blade before pouring contents from the  
bowl.  
Keep hands and utensils out of the processor bowl whilst  
connected to the power supply.  
Switch off and unplug:  
G
G
G
G
Note:  
For non-rewireable plugs the fuse cover MUST be refitted when  
replacing the fuse. If the fuse cover is lost then the plug must not  
be used until a replacement can be obtained. The correct fuse  
cover is identified by colour and a replacement may be obtained  
from your Kenwood Authorised Repairer (see Service).  
If a non-rewireable plug is cut off it must be DESTROYED  
IMMEDIATELY. An electric shock hazard may arise if an  
unwanted non-rewireable plug is inadvertently inserted into a  
13A socket outlet.  
G
G
G
before fitting or removing parts;  
G
when not in use;  
G
before cleaning.  
G
G
Never use your fingers to push food down the feed tube. Always  
use the pusher/s supplied.  
Before removing the lid from the bowl or bowl from the power  
unit:-  
This appliance conforms to EC directive 2004/108/EC on  
Electromagnetic Compatibility and EC regulation no. 1935/2004  
of 27/10/2004 on materials intended for contact with food.  
before using for the first time  
G
switch off;  
1 Remove the plastic blade covers from the knife blade. Take  
care the blades are very sharp. These covers should be  
discarded as they are to protect the blade during manufacture  
and transit only.  
G
wait until the attachment/blades have completely stopped.  
G
G
G
Liquids should be allowed to cool to room temperature before  
blending.  
Do not use the lid to operate the processor, always use the  
on/off speed control.  
This appliance will be damaged and may cause injury  
if the interlock mechanism is subjected to excessive  
force.  
2 Wash the parts see ‘care & cleaning’  
key  
processor  
G
G
G
Never use an unauthorised attachment.  
pusher  
feed tube  
lid  
bowl  
food processor drive  
speed/pulse control  
power unit  
safety interlock  
cord storage (at back)  
Never leave the appliance unattended when it is operating.  
Never use a damaged appliance. Get it checked or repaired: see  
‘service & customer care’.  
G
G
Never let the power unit, cord or plug get wet.  
Don’t let excess cord hang over the edge of a table or worktop  
or touch hot surfaces.  
G
G
Do not exceed the maximum capacities stated.  
This appliance is not intended for use by persons (including  
children) with reduced physical, sensory or mental capabilities, or  
lack of experience and knowledge, unless they have been given  
supervision or instruction concerning use of the appliance by a  
person responsible for their safety.  
attachments  
knife blade  
slicing plate  
shredding plate  
plate carrier  
whisk  
G
G
Children should be supervised to ensure that they do not play  
with the appliance.  
Only use the appliance for its intended domestic use. Kenwood  
will not accept any liability if the appliance is subject to improper  
use, or failure to comply with these instructions.  
Misuse of your processor can result in injury.  
maxi-blend canopy  
spatula  
G
2
 
Shortcrust pastry and scones  
to use your food processor  
1 Fit the bowl onto the processor base - handle towards the back -  
lower and turn clockwise until it locks firmly into place .  
2 Add an attachment over the food processor drive.  
Put the flour into the bowl. Use fat straight from the refrigerator  
3
and cut into 2cm/ ⁄4in cubes. Process until the mixture resembles  
fine breadcrumbs but take care not to overprocess. Leave the  
machine running and add the liquid down the feed tube. Process  
until one or two balls of pastry are formed. Chill before use.  
G
Always fit the bowl and attachment onto the processor before  
adding ingredients.  
Soups  
3 Fit the lid onto the bowl - feed tube towards the back of the  
appliance . Turn clockwise until the arrow on the lid aligns with  
the line on the power unit .  
4 Plug in and switch on.  
The processor won’t work if the bowl and lid are  
fitted incorrectly.  
Use the pulse (P) for short bursts. The pulse will operate for as  
long as the control is held in position.  
Purée soups either before or after cooking. Drain the ingredients  
and place into the bowl with a small quantity of liquid from the  
recipe. Process until the desired consistency has been reached,  
then add to the remainder of the liquid.  
G
Nuts  
Chop nuts for cakes and biscuits by placing into the bowl and  
processing until the desired consistency is obtained.  
G
Cake making  
5 Reverse the above procedure to remove the lid, attachments and  
Sponge type cakes are best made by the ‘all in one method’. All  
the ingredients are placed into the bowl and processed until  
smooth - approximately 10 seconds. A ‘soft tub’ margarine used  
straight from the refrigerator and cut into 2cm/ ⁄4in cubes should  
always be used.  
bowl.  
G
Always switch off and unplug before removing the lid.  
important  
3
G
Your processor is not suitable for crushing or grinding coffee  
beans, or converting granulated sugar to caster sugar.  
G
Savoury dips/spreads  
When adding almond essence or flavouring to mixtures avoid  
Place the solid ingredients into the bowl in 2.5cm/1in cubes.  
Process until finely chopped. Add the cream etc., and continue  
to process until the ingredients are well blended.  
contact with the plastic as this may result in permanent marking.  
maximum capacities  
Batters  
egg whites  
6
With the knife blade in position place the dry ingredients, egg  
and a little liquid in the bowl, process until smooth. Add the  
remaining liquid down the feed tube whilst the machine is  
operating.  
chopping meat  
300g/10oz  
250g/9oz  
340g/12oz  
800g/1lb 12oz  
800ml/1.3pt  
shortcrust pastry flour weight  
yeast dough flour weight  
one stage sponge cake total weight  
soup with canopy  
Mayonnaise  
Place the egg and seasonings into the bowl and mix for a few  
seconds. With the machine running gradually add the oil down  
the feed tube in a slow steady stream.  
using the attachments  
Yeast dough  
Place the flour, fat and other dry ingredients into the bowl and  
process for a few seconds to mix. With the machine running add  
the liquid mixture down the feed tube and continue processing  
until the mixture forms a dough and becomes smooth in  
appearance and elastic to touch - this will take 45-60 seconds.  
Allow the dough to rise then re-knead for 10 seconds.  
knife blade  
This blade is the most versatile of all the attachments. The  
texture you get is determined by the length of processing time.  
For coarser textures use the ‘pulse’ feature checking the  
consistency regularly.  
what the knife blade can do.  
whisk  
Raw meat  
Make ‘mince’ by trimming raw meat of any excess fat and  
cutting into 2cm/ ⁄4in cubes, place into the bowl and operate for  
approximately 10 seconds or until the desired texture is  
achieved. The longer you run the machine the smoother the  
texture will be.  
Use for egg whites and cream only. The whisk is unsuitable for  
other recipes. Make sure the bowl and whisk are free from any  
traces of grease or egg yolk when whisking egg whites.  
3
slicing and shredding plates  
Cooked meat  
what the cutting plates can do.  
Follow the method for raw meat but process for a shorter time.  
slicing plate - slices carrots, potato, cabbage, cucumber,  
courgette, beetroot, onion.  
shredding plate - grates cheese, carrot, potato and foods of a  
similar texture.  
Vegetables  
Cut the vegetables into pieces approximately 2.5cm/1in in size.  
Process foods having a similar texture together eg harder  
vegetables like carrots and potatoes or softer ones like  
mushrooms, tomatoes or cooked vegetables.  
to assemble the plate carrier  
1 Select the desired plate and fit into the carrier with the cutting  
side uppermost.  
Biscuit and breadcrumbs  
Drop pieces down the feed tube whilst the machine is operating.  
G
Locate one end of the plate under the rim and press the other  
end into position. It will only fit one way round .  
3
 
using the cutting plates  
shredding plate  
Cut pieces of food to fit the feed tube. Fill the tube almost to the  
top and push down using the pusher with an even pressure  
whilst the machine is running.  
service & customer care  
G
If the cord is damaged it must, for safety reasons, be replaced  
by KENWOOD or an authorised KENWOOD repairer.  
UK  
Longer shreds can be obtained by stacking pieces horizontally in  
the feed tube eg carrot.  
If you need help with:  
using your appliance or  
G
G
servicing, spare parts or repairs (in or out of guarantee)  
slicing plate  
call Kenwood customer care on 023 9239 2333. Have your  
model number (ie FP120) and date code (4 digit code  
ie 6T41) ready. They are on the underside of the power unit.  
If necessary cut food to fit the feed tube. Core foods such as  
apples and peppers. Pack the food in an upright position in the  
feed tube. The height should be slightly shorter than the feed  
tube. Using the pusher, push down with an even pressure whilst  
the machine is running.  
G
spares and attachments  
call 0870 2413653.  
G
other countries  
hints  
Use fresh ingredients.  
Contact the shop where you purchased your appliance.  
G
G
Don’t cut food up too small. Fill the feed tube fairly full, this  
prevents food from slipping sideways during processing.  
When slicing or shredding: food placed upright comes out  
shorter than food placed horizontally.  
After using a cutting plate there will always be a small amount of  
waste on the plate or in the food.  
Do not allow food to build up to the underside of the plate -  
empty regularly.  
Push food down the feed tube using an even pressure.  
G
Designed and engineered by Kenwood in the UK.  
G
Made in China.  
G
G
G
G
IMPORTANT INFORMATION FOR CORRECT DISPOSAL  
OF THE PRODUCT IN ACCORDANCE WITH EC  
DIRECTIVE 2002/96/EC.  
At the end of its working life, the product must not be disposed of as  
urban waste.  
It must be taken to a special local authority differentiated waste  
collection centre or to a dealer providing this service.  
Disposing of a household appliance separately avoids possible  
negative consequences for the environment and health deriving  
from inappropriate disposal and enables the constituent materials  
to be recovered to obtain significant savings in energy and  
resources. As a reminder of the need to dispose of household  
appliances separately, the product is marked with a crossed-out  
wheeled dustbin.  
maxi blend canopy  
When blending, use the maxi blend canopy in conjunction with  
the knife blade. It allows you to increase the liquid processing  
capacity of the bowl and improve the chopping performance of  
the blade.  
1 Place the canopy into the bowl over the knife blade - do not  
push down .  
2 Fit the lid ᕦ  
care & cleaning  
Always switch off and unplug before cleaning.  
Handle blades and cutting plates with care - they are extremely  
sharp.  
G
G
G
Some foods may discolour the plastic. This is perfectly normal  
and won’t harm the plastic or affect the flavour of your food. Rub  
with a cloth dipped in vegetable oil to remove the discolouration.  
guarantee UK only  
If your food processor goes wrong within one year from the date  
you bought it, we will repair it (or replace it if necessary) free of  
charge provided:  
power unit  
G
G
it has been used in accordance with these instructions.  
Wipe with a damp cloth, then dry. Ensure that the interlock area  
G
you have not misused, neglected, or damaged it;  
is clear of food debris.  
G
G
it has not been modified (unless by KENWOOD);  
Don’t immerse the power unit in water.  
G
G
it is not second hand;  
Wrap excess cord around the bracket at the back of the  
G
it has not been used commercially;  
appliance.  
G
you have not fitted a plug incorrectly; and  
you supply your receipt to show when you bought it.  
This guarantee does not affect your statutory rights.  
all other parts  
Wash by hand, then dry.  
Alternatively they can be washed on the top rack of your  
G
G
G
dishwasher. A short low temperature programme is  
recommended.  
4
 
recipes  
layered salad  
1/4 small white cabbage, stalk removed  
1/2 small red cabbage, stalk removed  
1/2 cucumber  
mackerel pâté  
200g/8oz smoked mackerel cut into 2cm/ ⁄4in cubes  
3
3
100g/4oz cream cheese cut into 2cm/ ⁄4in cubes  
2 eating apples, cored  
few drops of lemon juice  
salt and pepper  
2 carrots, peeled  
100g/4oz cheddar cheese  
50g/2oz walnuts  
optional  
}
Fit the knife blade in the bowl, add all the ingredients and blend  
until smooth.  
Separately slice the cabbage, cucumber and apples then place  
in layers in a salad bowl. Separately grate the carrot and cheese  
and add in layers to the bowl. Using the knife blade chop the  
walnuts and sprinkle on top of the salad. Serve with your  
favourite salad dressing.  
shortcrust pastry  
250g/9oz plain flour  
1
3
125g/4 ⁄2oz mixture of lard and margarine, cut into 2cm/ ⁄4in  
cubes, taken straight from the refrigerator  
pinch salt  
victoria sandwich  
150g/6oz ‘soft tub’ margarine, cut into 2cm/ ⁄4in cubes, taken  
3
45ml/9tsp water  
straight from the refrigerator  
150g/6oz caster sugar  
3 eggs  
150g/6oz self raising flour  
jam  
Fit the knife blade to the bowl, add the flour, fat and salt.  
Process until the mixture resembles fine breadcrumbs  
(approximately 6 seconds - don’t overprocess as it will continue  
mixing when the water is added.)  
With the machine running add the water down the feed tube and  
process until one or two balls of pastry are formed. Remove the  
pastry from the bowl and gather together by hand to prevent  
overprocessing. Wrap in cling film and chill for 30 minutes before  
using.  
icing sugar  
Using the knife blade, place the margarine, sugar, eggs and flour  
into the bowl. Process for a few seconds (approximately 5-8  
seconds) until smooth.  
Place the mixture into two greased 18cm/7in sandwich tins and  
bake in a pre-heated oven at 190°C/375°F/gas mark 5 for  
approximately 25 minutes until golden and springs back when  
lightly touched. Turn onto a wire rack and allow to cool, then  
sandwich together with jam and dredge with icing sugar.  
beef cobbler  
450g/1lb lean braising steak, cut into 2.5cm/1in cubes  
1 onion, peeled  
25g/1oz butter  
400g tin chopped tomatoes  
mushroom soup  
200g/8oz white button mushrooms  
1 small onion  
1
125g/4 ⁄2oz mushrooms, wiped  
1
2.5ml/ ⁄2tsp mixed herbs  
salt and pepper  
topping  
200g/8oz self raising flour  
75g/3oz suet  
50g/2oz cheddar cheese  
90ml/6tbsp water approximate  
50g/2oz butter  
250ml/ ⁄2pt white stock  
1
25g/1oz plain flour  
1
250ml/ ⁄2pt milk  
40ml/2tbsp single cream  
salt and pepper  
With the knife blade in position separately chop the onion,  
mushrooms and meat (chop the meat in two batches). Melt the  
butter add the onion and meat and fry for approximately 10  
minutes. Add the tomatoes, mushrooms and seasoning and  
simmer gently for approximately 20 minutes. Transfer the mixture  
to an ovenproof dish.  
Grate the cheese. Place the knife blade in position, add the  
cheese, flour and suet. Mix together then with the motor running  
add sufficient water down the feed tube to make a firm dough.  
Peel or wipe the mushrooms, slice mushrooms and onions using  
the slicing plate. Melt the butter and fry the vegetables for about  
5 minutes. Add the stock, bring to the boil, cover pan and allow  
to simmer for 15 minutes, cool slightly. With the knife blade in  
position pour the soup into the processor bowl, add the flour  
and process until smooth. Return to the pan add the milk, bring  
to the boil stirring all the time, finally add the cream and  
seasonings.  
1
Roll out on a lightly floured surface to approximately 1cm/ ⁄2in  
thick and cut out circles using a 6cm/2 ⁄2in cutter. Arrange the  
1
scones on top of the meat overlapping slightly. Brush with milk  
then bake at 200°C, 400°F or gas mark 6 for 30 minutes.  
5
 
white bread  
300g/10oz strong white plain flour  
5ml/1tsp salt  
1
6g/ ⁄4oz lard  
1
15g/ ⁄2oz fresh yeast or 10ml/2tsp dried active yeast plus  
5ml/1tsp sugar  
175ml/6fl.oz warm water  
dried active yeast  
Sprinkle the dried yeast into the warm water, add the sugar and  
allow to stand for approximately 10 minutes or until the mixture is  
frothy.  
fresh yeast  
Crumble into the bowl with the flour.  
other types of yeast  
Follow the manufacturers instructions.  
With the knife blade in the bowl, add the flour, salt, lard (fresh  
yeast if used) and process for a few seconds to evenly distribute  
the ingredients throughout the flour. With the machine operating,  
quickly pour the water or yeast liquid in a steady stream through  
the feed tube (this should take about 10 seconds). Continue  
processing until the mixture forms a dough and becomes  
smooth in appearance and elastic to the touch, this will take  
about 45 seconds. Remove the dough into either a greased  
polythene bag or a lightly floured bowl and cover. Leave this  
dough in a warm place until doubled in size. Return the risen  
dough to the processor bowl fitted with the knife blade and re-  
knead for about 10 seconds. Shape the dough into a loaf or  
about 15 rolls and place on greased baking trays and leave until  
double in size. Bake at 230°C/450°F/gas mark 8 for 20-25  
minutes for a loaf or 10-15 minutes for bread rolls. When the loaf  
or rolls are cooked they should sound hollow when tapped on  
the base.  
6
 
Head Office Address:  
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
Designed and engineered by Kenwood in the UK  
Made in China  
19026/3  
 

Insignia Flat Panel Television NS F27C User Manual
Jeff Rowland Design Group Stereo Amplifier Model 2 User Manual
JVC DVD Player HR XVC19BUS User Manual
JVC Home Theater System TH A32 User Manual
JVC Projector DLA RS35 User Manual
Karcher Pressure Washer KB 399 M User Manual
Kenmore Range 7907865 User Manual
Kenwood Car Stereo System TH 21A User Manual
Kenwood Marine Radio 502S User Manual
KitchenAid Food Processor KHB3581 User Manual