Model No. RBBE0787.1
Serial No.
Write the serial number in the
USER’S MANUAL
space above for reference.
Serial Number Decal (under seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete cus-
tomer satisfaction. If you have
questions, or if parts are missing,
PLEASE DO NOT CONTACT
THE STORE; please contact
Customer Care.
IMPORTANT: You must note
the product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-994-4999
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manu-
al for future reference.
new products, prizes,
fitness tips, and much more!
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
6. Make sure that the pin is fully inserted before
the weight bench is used.
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.
7. Keep children under age 12 and pets away
from the weight bench at all times.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
8. Wear appropriate clothes while exercising.
Always wear athletic shoes for foot protec-
tion while exercising.
3. The weight bench is intended for home use
only. Do not use the weight bench in a com-
mercial, rental, or institutional setting.
9. The weight bench is designed to support a
maximum user weight of 300 lbs. (133 kg)
and a maximum total weight of 400 lbs. (181
kg). Do not use the weight bench with more
than 100 lbs. (45 kg) of weight. Note: The
weight bench does not include weights.
4. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
bench to mount, dismount, and use it.
10. If you feel pain or dizziness while exercising,
stop immediately and cool down.
11. Use the weight bench only as described in
this manual.
5. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
3
BEFORE YOU BEGIN
Thank you for selecting the new REEBOK 95 AXB
weight bench. The weight bench is designed to be
used with your own weights to develop the major mus-
cles of your upper body.
®
model number and the location of the serial number
decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the weight bench
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
ASSEMBLED DIMENSIONS:
Height: 34 in. (86 cm)
Width: 19 in. (48 cm)
Depth: 47 in. (119 cm)
Weight: 50 lbs. (23 kg)
Backrest
Seat
Pin
Dumbbell Tubes
Pivot Bracket
4
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts
may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M4 x 12mm Self-tapping Screw (17)
M6 Washer (21)
M6 x 35mm Screw (15)
M8 Washer (20)
M8 x 38mm Bolt (18)
M8 Nylon Locknut (24)
M8 x 63mm Bolt (16)
M8 x 80mm Screw (13)
M10 Nylon Locknut (19)
5
ASSEMBLY
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• To hire an authorized service technician to
• Assembly requires only the included tools.
assemble the weight bench, call 1-800-445-2480.
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
• Assembly requires two persons.
• Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
1.
1
Before beginning assembly, make sure
that you have read and understand the
information in the box above.
1
Orient the Front Stabilizer (2) as shown. Attach
the Front Stabilizer and the Frame (1) to the
Front Leg (25) with four M8 x 63mm Bolts (16),
four M8 Washers (20), and four M8 Nylon
Locknuts (24). Do not tighten the Nylon
Locknuts yet.
20
16
24
20
16
25
24
2
Holes
6
2. Attach the Rear Stabilizer (3) to the Frame (1)
with two M8 x 63mm Bolts (16), two M8
2
16
Washers (20), and two M8 Nylon Locknuts (24).
Do not tighten the Nylon Locknuts yet.
3
20
1
24
3. Attach a Dumbbell Tube (10) to the Rear
Stabilizer (3) and the Front Stabilizer (2) with
two M8 x 80mm Screws (13) and two M8
Washers (20). Do not tighten the Screws yet.
3
13
20
Attach the other Dumbbell Tube (10) in the
same way.
3
Tighten the four M8 x 80mm Screws (13).
10
See steps 1 and 2. Tighten the four M8 Nylon
2
Locknuts (24).
20
13
4. Orient the Pivot Bracket (6) as shown and
attach it to the Backrest Frames (5) with four
M8 x 38mm Bolts (18) and four M8 Nylon
Locknuts (24). Do not tighten the Nylon
Locknuts yet.
4
5
18
5
18
6
24
24
7
5. Attach the Backrest (7) to the Backrest Frames
(5) with four M6 x 35mm Screws (15) and four
M6 Washers (21). Do not tighten the Screws
yet.
5
7
5
21
15
21
15
21
15
21
15
6. Insert the Pivot Bracket (6) into the slot in the
Frame (1). Attach an M8 x 38mm Bolt (18), two
Spacers (23), and an M8 Nylon Locknut (24) to
the last hole in the Pivot Bracket.
6
Apply some of the included grease to an M10 x
190mm Bolt (14). Attach the Backrest Frames
(5) to the Frame (1) with the Bolt and an M10
Nylon Locknut (19). Do not overtighten the
Nylon Locknut; the Backrest Frames must
pivot easily.
19
5
See step 4. Tighten the four M8 Nylon
Locknuts (24).
1
6
See step 5. Tighten the four M6 x 35mm
Grease
14
Screws (15).
24
23
18
8
7. Insert the Pin (9) into the Frame (1) and
through an adjustment hole in the Pivot Bracket
(6).
7
Then, attach the Pin/Tether (9) to the Frame (1)
with an M4 x 12mm Self-tapping Screw (17).
1
6
9
17
8. Attach the Seat (8) to the Frame (1) with two
M6 x 35mm Screws (15) and two M6 Washers
(21).
8
8
1
21
21
15
9. Make sure that all parts are properly tight-
ened before you use the weight bench.
9
ADJUSTMENT
The weight bench is designed to be used with your own weight set (not included). The steps below explain how
the weight bench can be adjusted. See EXERCISE GUIDELINES on page 11 for important exercise information,
and refer to the accompanying exercise guide to see the correct form for several exercises. Refer also to the
exercise information accompanying your weight set for additional exercises.
Make sure all parts are properly tightened each time the weight bench is used. Replace any worn parts immediate-
ly. The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents.
ADJUSTING THE BACKREST
The Backrest (7) can be used in a declined posi-
tion, a level position, or any of three inclined posi-
tions. To adjust the Backrest, first remove the Pin
(9) from the Frame (1). Move the Backrest to the
desired position, and reinsert the Pin into the Frame
7
and an adjustment hole in the Pivot Bracket (6).
WARNING:
Make sure that the
1
Pin (9) is fully inserted through the Frame
(1) and the Pivot Bracket (6).
9
6
Adjustment
Holes
10
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
Determining the appropriate length of time for each
workout, and the numbers of repetitions and sets to
To increase the size and strength of your muscles,
push them close to their maximum capacity. Your mus- complete, is an individual matter. Avoid overdoing it
cles will continually adapt and grow as you progres-
sively increase the intensity of your exercise. You can
adjust the intensity level of an individual exercise in
two ways:
during the first few months of your exercise program.
Progress at your own pace and be sensitive to your
body’s signals. If you experience pain or dizziness
while exercising, stop immediately and cool down; find
out what is wrong before continuing. Remember that
adequate rest and a proper diet are important factors
in any exercise program.
• by changing the amount of resistance used
• by changing the number of repetitions or sets per-
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
WARMING UP
The proper amount of resistance for each exercise
depends upon the individual user. You must gauge
your limits and select the amount of resistance that is
Begin each workout with 5 to 10 minutes of stretching
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
right for you. Begin with 3 sets of 8 repetitions for each circulation, raising your body temperature, and deliver-
exercise you perform. Rest for 3 minutes after each
set. When you can complete 3 sets of 12 repetitions
without difficulty, increase the amount of resistance.
ing more oxygen to your muscles.
WORKING OUT
Toning
Each workout should include 6 to 10 different exercis-
You can tone your muscles by pushing them to a mod- es. Select exercises for every major muscle group,
erate percentage of their capacity. Select a moderate
amount of resistance and increase the number of rep-
etitions in each set. Complete as many sets of 15 to
20 repetitions as possible without discomfort. Rest for
1 minute after each set. Work your muscles by com-
emphasizing areas that you want to develop most. To
give balance and variety to your workouts, vary the
exercises from workout to workout.
Schedule your workouts for the time of day when your
pleting more sets rather than by using high amounts of energy level is the highest. Each workout should be
resistance.
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of resistance and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
through the full range of motion for each exercise, and
moving only the appropriate parts of the body.
Cross Training
Cross training is an efficient way to get a complete and Exercising in an uncontrolled manner will leave you
well-balanced fitness program. An example of a bal-
anced program is:
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises, and a list of the
muscles affected. Refer to the muscle chart on the
next page to find the names of the muscles.
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle,
on Tuesday and Thursday.
The repetitions in each set should be performed
• Rest from both strength training and aerobic exercise smoothly and without pausing. The exertion stage of
for at least one full day each week to give your body
time to regenerate.
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
during the return stage. Never hold your breath.
The combination of strength training and aerobic exer-
cise will reshape and strengthen your body, plus devel-
op your heart and lungs.
11
Rest for a short period of time after each set. The
ideal resting periods are:
slowly as you stretch and do not bounce. Ease into
each stretch gradually and go only as far as you can
without strain. Stretching at the end of each workout
is an effective way to increase flexibility.
• Rest for three minutes after each set for a muscle
building workout.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
COOLING DOWN
End each workout with 5 to 10 minutes of stretching.
Include stretches for both your arms and legs. Move
MUSCLE CHART
O
A. Sternomastoid (neck)
A
B. Pectoralis Major (chest)
P
Q
C. Biceps (front of arm)
L
B
D. Obliques (waist)
E. Brachioradials (forearm)
R
S
F. Hip Flexors (upper thigh)
G. Abductor (outer thigh)
C
D
H. Quadriceps (front of thigh)
I. Sartorius (front of thigh)
J. Tibialis Anterior (front of calf)
K. Soleus (front of calf)
E
T
F
M
N
U
L. Anterior Deltoid (shoulder)
M. Rectus Abdominus (stomach)
N. Adductor (inner thigh)
G
H
I
V
O. Trapezius (upper back)
P. Rhomboideus (upper back)
Q. Posterior Deltoid (shoulder)
R. Triceps (back of arm)
W
X
J
K
S. Latissimus Dorsi (mid back)
T. Spinae Erectors (lower back)
U. Gluteus Medius (hip)
V. Gluteus Maximus (buttocks)
W. Hamstring (back of leg)
X. Gastrocnemius (back of calf)
12
NOTES
13
PART LIST—Model No. RBBE0787.1
R1007A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
1
1
1
1
2
1
1
1
1
2
4
2
4
1
6
Frame
16
17
18
19
20
21
22
23
24
25
*
6
1
M8 x 63mm Bolt
Front Stabilizer
Rear Stabilizer
1" x 2" Inner Cap
Backrest Frame
Pivot Bracket
Backrest
M4 x 12mm Self-tapping Screw
M8 x 38mm Bolt
M10 Nylon Locknut
M8 Washer
3
5
4
1
5
10
6
6
M6 Washer
7
6
Bushing
8
Seat
2
Spacer
9
Pin/Tether
11
1
M8 Nylon Locknut
Front Leg
10
11
12
13
14
15
Dumbbell Tube
Round Outer Cap
1" Square Inner Cap
M8 x 80mm Screw
M10 x 190mm Bolt
M6 x 35mm Screw
–
Hex Key
*
–
User’s Manual
Exercise Guide
Grease Packet
*
–
*
–
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
14
EXPLODED DRAWING—Model No. RBBE0787.1
R1007A
7
12
18
24
18
21
21
8
6
15
18
5
21
21
11
24
22
23
16
20
19
15
23
18
1
22
13
20
3
9
20
24
4
17
16
11
21
14
16
15
10
20
24
10
25
24
20
2
11
20
13
20
11
15
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro-
vide the following information when contacting us:
• the model number and serial number of the product (see the front cover of the manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the part(s) (see the PART LIST and the EXPLODED DRAWING near the
end of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. For
in-home service, the customer will be responsible for a minimal trip charge. This warranty does not extend
to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or repairs not provided by an ICON authorized service center; products used
for commercial or rental purposes; or products used as store display models. No other warranty beyond
that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 260601 R1007A
Printed in China © 2007 ICON IP, Inc.
|