Virtual Keyboard
YOu’Ve NeVer tYPed lIKe tHIS BefOre
caUTIon
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
THERE ARE NO SERVICEABLE PARTS INSIDE
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE
The lightning flash with arrow-head symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the unit’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the unit
IMPoRTanT safeTY InsTRUcTIons
All of the safety and operating instructions should be read, adhered to and followed
before the unit is operated
save These InsTRUcTIons
2
DanGeR
To reduce the risk of electric shock, burns, fire or injury:
1 Do not use while bathing or in a shower
2 Do not place or store unit where it can fall or be pulled into a tub or sink
3 Do not place in, drop or submerge in water or other liquid
4 Do not reach for unit that has fallen into water Unplug it immediately
5 Care should be taken so that objects do not fall and liquids are not
spilled onto the unit
WaRnInG
1 Close supervision is necessary when this appliance/product is used by or near
children or mentally disabled individuals
2 Use this unit only for its intended use as described in this manual
3 Unplug this unit during lightning storms or when unused for long
periods of time
4 Never drop or insert an object into any opening
5 The unit should be situated away from direct sunlight or heat sources such
as radiators, electric heaters, heat registers, stoves, or other units (including
amplifiers) that produce heat Avoid placing on top of stereo equipment that
radiates heat
6 Do not overload electrical outlet Use only the power source as indicated
7 Do not carry this unit by cord or use cord as handle
3
8 Never operate this unit if it has a damaged cord or plug, if it is not working
properly, or if it has been dropped or damaged, or dropped into water If the
unit’s power supply cord or plug is damaged, do not attempt to fix it yourself
9 To avoid the risk of electric shock, do not disassemble or attempt to repair
the unit Incorrect repair can cause risk of electric shock or injury to persons
when unit is used
10 Do not operate in the presence of explosive and/or flammable fumes
11 Never remove the plug from the socket by pulling the power cord
4
safeTY PRecaUTIons
1 Avoid exposing this product to direct sunlight for extended periods of time, and
keep it away from heat sources
2 There is a risk of malfunction if product is used in places where sudden or
extreme temperature changes occur
3 Applying excessive force or impact to this product may result in product damage,
and will void warranty
4 To ensure safety and prevent damage, use only the dedicated mini-USB to USB
cable supplied with this product
5 Never attempt to disassemble or service this product yourself Doing so can
result in electrical shock and will void the warranty
6 This Class 2 laser product is certified by FDA safety regulation For your
safety, please do not stare directly into the laser source Doing so could
damage your eyes
7 Avoid placing any object within the space between the main unit and the laser
projection keyboard layout
8 Please do not use this product on uneven or irregular surfaces Place the
product on a flat surface Avoid table or surface that is as transparent or
reflective as glass or mirror
5
caUTIons
1 For safety reasons, be sure to use only the mini USB to USB cable specified for
this product
2 Make sure to fully charge the battery before using the product for the first time
3 Battery charging times may vary slightly depending on the ambient temperature
4 The battery may not be charged to 100 percent of its rated cell capacity even
when the battery status icon indicates all green lights
5 Using or storing the battery in high temperature, humidity and pressure
environments may cause the battery to explode
6 Since the battery is a consumable item, its storage capacity decreases gradually
as time passes
fcc WaRnInG
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions:
1 This device may not cause harmful interference to another device, and
2 This device must accept any interference received, including interference that
may cause undesired operation
This equipment generates and uses radio frequency energy If this equipment is
changed or modified in any way except for modifications approved in this manual,
it may cause harmful interference Any unauthorized changes or modifications to this
equipment could void the user’s authority to operate this device
6
fcc sTaTeMenT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules These limits are designed
to provide reasonable protection against harmful interference in a residential
installation This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications However, there is no guarantee that
interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
7
Rf exPosURe InfoRMaTIon
The antenna used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter
caUTIon
1 Battery may explode if replaced with an incompatible battery Dispose the used
batteries according to the instructions “This transmitter must not be co-located
or operated in conjunction with any other antenna or transmitter ”
2 Antenna shall be mounted in such a manner to minimize the potential for
human contact during normal operation The antenna should not be touched
during operation to avoid the possibility of exceeding the FCC radio frequency
exposure limit
envIRonMenTallY fRIenDlY DIsPosal
anD RecYclInG
This product does not contain any substances known to be hazardous to human
health To protect the environment, dispose of this product separately from
household waste once it has reached its end of life, or take it to your nearest
electronics recycling service center
8
noTes foR oPTIMal PRoDUcT UsaGe
CONdItIONS tO AVOId:
1 Avoid direct sunlight
2 Avoid low color temperature light source, such as tungsten, halogen, or
incandescent lamp
3 Avoid uneven or irregular surfaces Place the product on flat surfaces
4 Avoid a table or surface that is as transparent or reflective as glass or mirror
5 Avoid placing any objects within the space between the main unit and the laser
projected keyboard layout
Note: Because this product uses infrared rays, strong infrared radiation from
direct or reflected sunlight or from tungsten (halogen or incandescent) lighting
may cause operating error.
AdjuStINg SeNSItIVItY
The Virtual Keyboard features sensitivity adjustment for better accuracy To increase
sensitivity, press and hold the FN key and tap the K key To lower sensitivity, keep
pressing this key combination to cycle through all settings
If keystrokes are not recognized after adjusting sensitivity to the lowest setting, you
may need to reset the Virtual Keyboard To reset, hold down the power button for 20
seconds This will reset all settings to original format
9
locaTIon of conTRols
1 Power Switch
1
2
3
4
2 Keyboard Pattern Projector
3 Sensor
4 OLED Screen Showing:
Battery/Bluetooth®/Keyboard/
Mouse/Charging/Operating
Settings
5 Infrared Beam
6 Key Ring Strap
7 Micro USB Port
5
IdeNtIfYINg PArtS ANd tHeIr
fuNCtIONS.
6
7
Projector: Uses a red laser to project the image of
a keyboard onto a flat surface in front of the typist
Sensor: Picks up the infrared light reflected off the
typist’s fingers and triangulates the location of the
reflected light to determine which key was pressed
This sensor provides a keyboard function
Ir light Window: Uses an infrared laser to emit an
invisible plane of light a few millimeters above the
projection surface so that the infrared light can be
reflected off of the typist’s fingers to the sensor
10
chaRGInG
The Virtual Keyboard has a built-in Rechargeable Lithium-ion Polymer Battery
The Battery Operating Time is approximately 120 minutes
Use the USB cable (included) to charge the Virtual Keyboard’s battery
Simply connect the Virtual Keyboard to a 2 1 USB outlet to charge
Charging time is approximately 240 minutes When the charging is complete all
battery status bars will be filled in on the battery status icon shown on the display
Note: the charging time increases if the product is in use while charging.
the battery may not be charged to 100% of its rated cell capacity even when
the battery status on Virtual Keyboard screen indicates all bars.
connecTInG
Connection via Bluetooth® does not require installation of a separate driver
Bluetooth COmPAtIBle deVICeS
• iOS4 (iPhone® 3GS/4/4S/5, iPad®/iPad 2/iPad (3rd generation), iPad mini)
• Android* 2 0 and later
*Some restrictions apply to AndroidTM devices Please visit the following Website:
www CTX com for information on connecting to Android devices
• Windows® XP/Vista®/7
• Windows Phone 7
• Mac® OS (using Keyboard only)
11
Bluetooth CONNeCtION
1 Power on Virtual Keyboard
2 Bluetooth icon will blink, indicating the device is searching for a new or
previously paired device within its proximity This will last 30 seconds
3 Upon successful pairing, the Bluetooth icon will stop blinking
Note: If the Virtual Keyboard cannot locate a new or previously paired host
device within 30 seconds, it will discontinue the Bluetooth search and the
Bluetooth icon will disappear. to start the process again you will have to turn
the device off and on or press fN and W on the Virtual Keyboard to start the
search again.
4 After successful pairing of host device with the Virtual Keyboard, the keyboard
function will automatically set in default mode
CONNeCtINg tO iPhone ANd iPad deVICeS
iPhone and iPad connects to Virtual Keyboard via Bluetooth A driver is not required
1 Power on Virtual Keyboard by pressing and holding the power button
The blinking Bluetooth icon indicates that the device is ready to pair
2 On your iPhone/iPad, locate and select Bluetooth
3 Locate and select “CTX - VK200” under Devices and follow the on-screen
instructions
4 Successful pairing is indicated by “Connected” message, and the solid Bluetooth
icon being displays on the Virtual Keyboard’s screen
Note: iPhone/iPad OS (iOS4) does not support mouse function. When the
keyboard does not function with successful pairing, please make sure the
device is in keyboard mode. If the device is in mouse mode, press fN and m
key to change to Keyboard mode.
12
Connecting to Android devices
Some Android 2 0 and later devices support Bluetooth and do not require
installation of a separate driver Please visit our Website Brookstone com for more
information on Android drivers
1 Turn on Virtual Keyboard by pressing and holding the power button A blinking
Bluetooth icon indicates that the device is ready to pair
2 On your device, locate and select Bluetooth
3 Locate and select “CTX - VK200” under devices and follow the on-screen
instructions
4 Successful pairing is indicated by a “Connected” message and the Bluetooth
icon on the Virtual Keyboard becomes solid
Note: Android OS supports mouse function. to switch from keyboard to
mouse mode, press and hold “fN” button and tap the m key. to change back
to keyboard mode, tap m again while holding fN button. the screen will show
either KBd or mSe for keyboard or mouse mode.
13
CONNeCtINg tO PC (BluetOOtH/uSB)
Connecting via Bluetooth
If your computer supports Bluetooth installation, a separate driver is not required
1 Turn on Virtual Keyboard by holding the power button for 2 seconds A blinking
Bluetooth icon indicates that the device is ready to pair
2 Please check your PC and make sure Bluetooth is on With Bluetooth on,
click the Bluetooth icon on the task bar Windows will search and locate
“CTX - VK200 ” Highlight “CTX - VK200” by clicking on found device and
select NEXT
3 Successful pairing will be indicated by the solid Bluetooth icon present on the
Keyboard’s display
4 To turn off Virtual Keyboard, Press the power button
5 Virtual Keyboard will connect to host PC automatically when turned back on
Connecting via uSB
This device is compatible with all USB capable operating systems
USB 2 0 or 1 1 connections allow plug-n-play, without installing a separate driver
Connect Virtual Keyboard and host device using the supplied USB cable Host
device must support USB
Note: most Windows devices support uSB. If the Virtual Keyboard does not
function with successful pairing, make sure the device is in keyboard mode. If
device is in mouse mode, press fN and m to change back to keyboard mode.
14
CONNeCtINg VIA uSB fOr Windows & mac (Plug-n-play)
1 Connect the host device and Virtual Keyboard using the Micro-USB to USB
cable provided
2 Turn on Virtual Keyboard
3 Successful connection is indicated by the virtual keyboard screen displaying a
“U” in the top right hand corner
Note: Windows 7 supports multi-touch mouse function. to switch from
keyboard to mouse mode, press and hold “fN” button and tap the m key.
to change back to keyboard mode, tap m again. the screen will show either
KBd or mSe for keyboard or mouse mode.
CHANgINg KeYBOArd mOde tO mOuSe mOde
Note: default is keyboard function.
1 Changing from keyboard mode to mouse mode On the keyboard, press and hold
FN key and tap the M key The screen will display a MSE, indicating successful
change to mouse mode
2 Changing from mouse mode to keyboard mode On the keyboard, press and
hold FN key and tap the M key The screen will display a KBD, indicating
successful change to keyboard mode
Note: mouse function is only available on devices that support
curser/mouse function.
15
Below are examples of how to operate the Virtual Keyboard in Mouse Mode
Click & Right Click
Control the Curser
Forward & Back
Zoom In & Out
Drag & Scroll
Note: Special keys
Not all keys displayed on projection keyboard layout correspond to input keys on
host device. for example, meNu key will not function on a host device that does
not support the meNu function. Same applies to fN and Alt function keys.
16
AdjuStINg KeY StrOKe SOuNd leVel
Press and hold FN key and press S key Continually pressing the FN key and
pressing the S key will cycle through all available sound levels There are 4 levels of
sound, including mute You will see your current sound level displayed on the screen
The sound level remains as adjusted when device is turned off and on
Note: Please consider those around you when adjusting sound level.
AdjuStINg KeYBOArd BrIgHtNeSS
Press and hold FN key and press B key Continually pressing the FN key and
pressing the B key will cycle through all available brightness levels There are 4 levels
of brightness You will see your current brightness level displayed on the screen
Note: fN key is not a repeat key. fN key must be clicked once for each adjustment.
CAlIBrAtINg (trOuBleSHOOtINg)
Important: The Virtual Keyboard comes ready to use, however, if you find the keys
are not reacting as expected, follow the steps below to calibrate your keyboard
1 Press the FN button and tap the C key twice The screen will go in to calibration
mode Alternatively holding the On/Off button down for 10 seconds after device
is powered on, will also go into calibration mode
2 The screen will display 2 flashing icons Press the function keys (F1 and F12)
Hold your fingers down on the keys, the unit will show 2 icons flashing at the
top, until you hear a beep
3 The screen will now show 2 icons flashing at the bottom of the unit Press
the bottom outside keys (FN and arrow right) Hold your fingers down on the
keys until you hear a beep
4 The screen will then go back to the home screen as calibration of the unit has
been completed
5 If the keys are still being incorrectly recognized, try calibrating again
17
Note: to exit calibration mode at any time, press the fN and C key, again.
No calibration information will be saved until the entire calibration mode has
been completed.
QuICK KeY refereNCe guIde
Bluetooth:
1 Searching Last Device (Bluetooth icon blinking)
2 Searching New Device (Bluetooth icon blinking)
3 Successful Pairing (Bluetooth icon solid)
4 Disconnected (Bluetooth icon not visible)
uSB Connection: U will be displayed when USB cord is plugged into computer
Bluetooth will have preference over the USB connection Press FN and W on the
Virtual Keyboard to override and connect to USB, even when a previously paired
Bluetooth device is in range
Adjusting Sound (FN and S): Volume level bars will appear
Adjusting Key-press Sensitivity (FN and K): Sensitivity level bars will appear
Adjusting Brightness (FN and B): Brightness level bars will appear
Calibration (FN and C): Must press C twice – or holding on/off for 10 seconds
1 Shows two icons on top flashing for user to hold the F1 and F12 keys on the
first row (beeps for success) Hold down finger for 3 seconds
2 Shows two icons on bottom flashing for user to press the outside keys on the
bottom row (FN and right arrow) Hold down fingers for 3 seconds (beeps for
success) then goes back to home screen
18
QuICK KeY refereNCe guIde (CONtINued)
reset (FN and R): Must press R twice
Switching Between mouse/Keyboard mode: (FN and M)
turning Keyboard display (On/Off): Tap three keys at once
sPecIfIcaTIons
PAtterN PrOjeCtOr
Light Source Red Laser Diode
Keyboard Layout Approx 19mm Pitch,
QWERTY layout
Keyboard Size Approx Width: 280mm
Height: 102mm
Keyboard Location Approx 100mm from the
bottom of the device
Project Surface Non-reflective, opaque
flat surface
KeYBOArd SeNSOr
Recognition Rate Up to 350 characters per min
Operating Surface Any firm, flat surface
19
sPecIfIcaTIons
eleCtrICAl CHArACterIStICS
External Power Supply USB Power/less than
5V 500mA
Battery and Capacity Lithium-ion Polymer Battery,
500mAh (MAX) @ 3 7V
Battery Operating Time Approx 120 minutes
Battery Charging Time Approx 240 minutes
USB Interface USB 1 1 & 2 0
Bluetooth v2 1 (Class 2)
Frequency Range 2402-2480MHz
Channel 79
Modulation GFSK
eNVIrONmeNtAl CONdItIONS
Operating Temperature 0 ~ 95F/90%RH
Storage Temperature 23 ~ 95F/~90%RH
dImeNSIONS ANd WeIgHt CONdItIONS
Size 62mm x 42mm x 16mm
Weight Approx 78 grams
20
one (1) YeaR lIMITeD WaRRanTY
Brookstone® warrants this product against defects in materials and/or workmanship
under normal use for a period of ONE (1) YEAR from the date of purchase by the
original purchaser (“Warranty Period”) If a defect arises and a valid claim is received
within the Warranty Period, at its option, Brookstone will either 1) repair the defect
at no charge, using new or refurbished replacement parts, or 2) replace the product
with a new product that is at least functionally equivalent to the original product, or
3) provide a store credit in the amount of the purchase price of the original product
A replacement product or part, including a user-installable part installed in accordance
with instructions provided by Brookstone, assumes the remaining warranty of the
original product When a product or part is exchanged, any replacement item becomes
your property and the replaced item becomes Brookstone’s property When a store
credit is given, the original product must be returned to Brookstone and becomes
Brookstone’s property
Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service
at 1-800-292-9819 Please be prepared to describe the product that needs service
and the nature of the problem A purchase receipt is required All repairs and
replacements must be authorized in advance Service options, parts availability and
response times will vary You are responsible for delivery and the cost of delivery of
the product or any parts to the authorized service center for replacement, per our
instructions
limits and exclusions: Coverage under this Limited Warranty is limited to the United
States of America, including the District of Columbia and the U S Territories of
Guam, Puerto Rico, and the U S Virgin Islands This Limited Warranty applies only
to products manufactured for Brookstone that can be identified by the “Brookstone”
trademark, trade name, or logo affixed to them or their packaging The Limited
Warranty does not apply to any non-Brookstone products Manufacturers or
21
suppliers other than Brookstone may provide their own warranties to the purchaser,
but Brookstone, in so far as permitted by law, provides these products “as is ”
This warranty does not apply to: a) damage caused by failure to follow instructions
relating to product’s use or the installation of components; b) damage caused by
accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage
caused by service performed by anyone who is not a representative of Brookstone;
d) accessories used in conjunction with a covered product; e) a product or part
that has been modified to alter functionality or capability; f) items intended to be
periodically replaced by the purchaser during the normal life of the product including,
without limitation, batteries or light bulbs; g) any product sold “as is” including, without
limitation, floor demonstration models and refurbished items; or h) a product that is
used commercially or for a commercial purpose
BrOOKStONe SHAll NOt Be lIABle fOr INCIdeNtAl Or CONSeQueNtIAl
dAmAgeS reSultINg frOm tHe uSe Of tHIS PrOduCt, Or ArISINg
Out Of ANY BreACH Of tHIS WArrANtY. tO tHe eXteNt PermItted BY
APPlICABle lAW, BrOOKStONe dISClAImS ANY ANd All StAtutOrY Or
ImPlIed WArrANtIeS, INCludINg, WItHOut lImItAtION, WArrANtIeS
Of merCHANtABIlItY, fItNeSS fOr A PArtICulAr PurPOSe ANd
WArrANtIeS AgAINSt HIddeN Or lAteNt defeCtS. If BrOOKStONe
CANNOt lAWfullY dISClAIm StAtutOrY Or ImPlIed WArrANtIeS, tHeN
tO tHe eXteNt PermItted BY lAW, All SuCH WArrANtIeS SHAll Be
lImIted IN durAtION tO tHe durAtION Of tHIS eXPreSS WArrANtY.
Some states disallow the exclusion or limitation of incidental or consequential damages
or how long an implied warranty lasts, so the above exclusions or limitations may not
apply to you This warranty gives you specific legal rights and you may also have other
rights, which vary from state to state
22
Find thousands more
great ideas online
796246
Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone com
|