Cisco Systems Frozen Dessert Maker SMR 273 User Manual

Process and Memory Management Commands  
on Cisco IOS-XR Software  
This chapter describes the commands used to manage processes and memory on the  
Cisco IOS-XR software.  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 3  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
monitor processes  
Table 14  
Interactive Display Com m ands for the m onitor processes Com m and (continued)  
Command Description  
m
c
Sorts display by memory used.  
Sorts display by number of open channels.  
Sorts display by number of open files.  
f
Examples  
monitor processes  
RP/0/RP1/CPU0:router# monitor processes  
195 processes; 628 threads; 3300 channels, 4579 fds  
CPU states: 47.6% idle, 1.2% user, 51.1% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID TIDS Chans  
FDs Tmrs  
MEM  
0
228K  
1M  
648K  
352K  
16M  
564K  
216K  
240K  
204K  
HH:MM:SS  
5:53:31 51.11% kernel  
CPU NAME  
1
52  
342  
27 198  
5 215  
4 195  
8
44  
14  
10  
39  
14  
8
1
5
6
0
11  
5
0:00:02 0.52% devc-conaux  
0:00:08 0.34% wdsysmon  
0:00:00 0.16% ptop  
0:00:09 0.07% shelfmgr  
0:00:29 0.06% eth_server  
0:00:05 0.02% bcm_process  
0:00:02 0.01% sysdb_medusa_s  
0:00:01 0.01% devc-vty  
0:00:09 0.01% packet  
495806  
293  
1
7
11  
3
1
31  
24  
10  
7
55  
121  
311  
2
4
18  
40  
19  
4
5
4
138  
265  
4
5
14  
31  
monitor processes location  
RP/0/RP1/CPU0:router# monitor processes location 0/rp1/cpu0  
202 processes; 724 threads; 3750 channels, 5092 fds  
CPU states: 48.8% idle, 0.8% user, 1.5% kernel  
Memory: 2048M total, 1526M avail, page size 4K  
JID TIDS Chans  
FDs Tmrs  
MEM  
0
HH:MM:SS  
CPU NAME  
1
27 205  
3
1
10:54:12 1.52% procnto-600-smp-cisco-in  
str  
264  
53  
180  
69  
5
42  
19  
564  
42  
8
4
0
6
3
0
1
1
4
4
272K  
1M  
1M  
0:00:15 0.37% packet  
0:00:06 0.10% dllmgr  
0:00:19 0.05% gsp  
0:00:54 0.04% qnet  
0:00:04 0.03% pkgfs  
0:00:00 0.02% envmon  
0:00:00 0.02% showd_lc  
0:00:17 0.02% sysdb_svr_local  
0:00:07 0.02% sysdb_medusa_s  
2 202  
15  
22  
5
2
93  
94  
4
6
6
1M  
67  
6
956K  
480K  
112K  
1M  
156  
294  
314  
310  
18  
12  
14  
18  
1
3 185  
4
7
276K  
monitor processes dumbtty  
RP/0/RP1/CPU0:router# monitor processes dumbtty  
Computing times...195 processes; 628 threads; 3721 channels, 4801 fds  
CPU states: 37.1% idle, 1.1% user, 61.7% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID TIDS Chans  
FDs Tmrs  
MEM  
0
648K  
352K  
HH:MM:SS  
6:33:33 61.76% kernel  
0:00:00 0.64% ptop  
CPU NAME  
1
544958  
293  
27 198  
6
8
1
0
1
7
1
31  
39  
11  
0:00:10 0.10% shelfmgr  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 5  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
monitor processes  
180  
304  
55  
15  
3
11  
22  
2
82  
14  
24  
91  
35  
25  
10  
42  
29  
14  
8
18  
34  
8
6
7
5
3
4
5
2
5M  
304K  
16M  
0:00:26 0.10% gsp  
0:00:02 0.06% statsd_manager  
0:00:32 0.03% eth_server  
0:00:31 0.03% qnet  
0:00:01 0.03% dsc  
0:00:00 0.03% statsd_server  
0:00:06 0.03% bcm_process  
70  
1M  
153  
303  
121  
120K  
292K  
564K  
3
3
195 processes; 628 threads; 3409 channels, 4601 fds  
CPU states: 46.5% idle, 0.5% user, 52.8% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID TIDS Chans  
FDs Tmrs  
MEM  
0
228K  
352K  
1M  
240K  
2M  
804K  
944K  
216K  
1M  
HH:MM:SS  
6:33:44 52.89% kernel  
CPU NAME  
1
52  
27 198  
5 215  
6
44  
1
5
8
4
5
9
0
0
4
6
0:00:06 0.38% devc-conaux  
0:00:08 0.03% sysdb_mc  
0:00:12 0.03% sysdb_svr_local  
0:00:02 0.02% devc-vty  
0:00:09 0.01% snmpd  
0:00:04 0.00% pkgfs  
0:00:06 0.00% dllmgr  
0:00:03 0.00% sysdb_medusa_s  
0:00:08 0.00% wdsysmon  
309  
315  
138  
298  
67  
6
25  
23  
3 177  
14  
4
9
4
14  
25  
4
40  
111  
7
53  
2 195  
547  
18  
311  
342  
4
7
4 195  
14  
Use of Interactive Commands  
When the n or d interactive command is used, the monitor processes command prompts you to enter a  
number. For example, when the interactive command n is entered, the prompt responds as shown below:  
Enter number of procs to display: 15  
195 processes; 628 threads; 3375 channels, 4495 fds  
CPU states: 49.0% idle, 0.9% user, 50.0% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID TIDS Chans  
FDs Tmrs  
MEM  
0
228K  
352K  
1M  
304K  
352K  
1M  
HH:MM:SS  
6:11:43 50.01% kernel  
CPU NAME  
1
52  
27 198  
5 215  
2
44  
39  
14  
29  
23  
14  
111  
19  
18  
17  
36  
34  
46  
31  
1
5
11  
4
7
8
6
9
4
4
0:00:05 0.72% devc-conaux  
0:00:09 0.04% shelfmgr  
0:00:11 0.03% sysdb_svr_local  
0:00:01 0.02% statsd_manager  
0:00:08 0.02% sysdb_mc  
0:00:08 0.01% wdsysmon  
0:00:09 0.00% snmpd  
0:00:09 0.00% packet  
0:00:00 0.00% dsc  
0:00:00 0.00% sc_reddrv  
0:00:00 0.00% qlink  
0:00:00 0.00% statsd_server  
0:00:00 0.00% ospf  
293  
315  
304  
309  
342  
298  
265  
153  
290  
275  
303  
262  
239  
7
31  
3 177  
3
6
14  
25  
4 195  
9
5
2
4
7
3
5
3
25  
31  
35  
6
34  
25  
23  
26  
2M  
204K  
120K  
112K  
588K  
292K  
1M  
2
7
5
6
9
452K  
0:00:00 0.00% lpts_pa  
If the number you enter is outside the acceptable range, you will be prompted for another number:  
Enter number of procs to display: 435  
Please enter a number between 5 and 40  
Enter number of procs to display:  
Related Commands  
Command  
Description  
Displays auto-updating thread statistics.  
Displays information on all processes, or a single process.  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 6  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
monitor threads  
monitor threads  
To display auto-updating statistics on threads in a full-screen mode, use the monitor threads command  
in EXEC mode.  
monitor threads [dumbtty] [iteration number] [location node-id]  
Syntax Description  
dumbtty  
(Optional) Displays the output of the command as if on a dumb  
terminal (the screen is not refreshed).  
iteration number  
location node-id  
(Optional) Number of times the statistics display is to be updated, in  
the range from 0 to 4294967295.  
(Optional) Displays the output from the command from the designated  
node. The node-id argument is entered in the rack/slot/module  
notation.  
Defaults  
When all keywords are omitted, the command displays the first ten threads for the local node, sorted in  
descending order by the time used. The display is cleared and updated every 5 seconds until you quit the  
monitor command.  
Command Modes  
Command History  
EXEC  
Release  
Modification  
Release 2.0  
This command was introduced.  
Usage Guidelines  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
This command shows the top 10 threads based on CPU usage. The display refreshes every 10 seconds.  
To change the parameters displayed by the monitor threads command, enter one of the key  
commands described in Table 15.  
To terminate the display and return to the system prompt, enter the q key.  
To list the interactive commands, type ? during the display. Example:  
The options are described in Table 15.  
Table 15  
Interactive Display Com m ands for the m onitor threads Com m and  
Command Description  
q
n
Quits the interactive display and returns to the system prompt.  
Changes the number of threads to be displayed.  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 7  
 
   
Process and Memory Management Commands on Cisco IOS-XR Software  
monitor threads  
Table 15  
Interactive Display Com m ands for the m onitor threads Com m and (continued)  
Command Description  
d
l
Changes the delay interval between updates.  
Refreshes the screen.  
Examples  
monitor threads  
RP/0/RP1/CPU0:router# monitor threads  
195 processes; 628 threads;  
CPU states: 98.2% idle, 0.9% user, 0.7% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID  
1
1
342  
52  
52  
TID LAST_CPU PRI STATE HH:MM:SS  
CPU COMMAND  
12  
25  
1
1
1
1
0
1
0
0
0
0
0
10 Rcv  
10 Run  
19 Rcv  
21 Rcv  
18 Rcv  
10 Rply  
55 Rcv  
10 Rcv  
10 Rcv  
55 Rcv  
0:00:09  
0:00:30  
0:00:07  
0:00:03  
0:00:02  
0:00:00  
0:00:06  
0:00:02  
0:00:11  
0:00:11  
0.42% procnto-600-smp-cisco-instr  
0.36% procnto-600-smp-cisco-instr  
0.20% wdsysmon  
0.15% devc-conaux  
0.07% devc-conaux  
0.07% top  
0.03% shelfmgr  
0.03% eth_server  
0.03% sysdb_svr_local  
0.02% eth_server  
5
3
1
6
8
3
7
532670  
293  
55  
315  
55  
monitor threads location  
RP/0/RP1/CPU0:router# monitor threads location 0/rp1/cpu0  
Computing times...195 processes; 628 threads;  
CPU states: 95.1% idle, 2.7% user, 2.0% kernel  
Memory: 2048M total, 1576M avail, page size 4K  
JID  
1
TID LAST_CPU PRI STATE HH:MM:SS  
CPU COMMAND  
2.08% procnto-600-smp-cisco-instr  
0.89% packet  
0.65% qsm  
0.51% top  
0.07% shelfmgr  
0.07% gsp  
0.07% sysdb_svr_local  
0.04% eth_server  
0.04% gsp  
25  
5
0
0
1
0
1
1
0
1
0
0
10 Run  
10 SigW  
10 Rcv  
10 Rply  
55 Rcv  
10 Rcv  
10 Rcv  
55 Rcv  
10 Rcv  
10 Rcv  
0:00:32  
0:00:09  
0:00:00  
0:00:00  
0:00:01  
0:00:02  
0:00:12  
0:00:12  
0:00:01  
0:00:01  
265  
279  
557246  
293  
180  
315  
55  
1
1
5
13  
3
7
1
9
180  
298  
0.04% snmpd  
Use of Interactive Commands  
When the n or d interactive command is used, the monitor threads command prompts for a number  
appropriate to the specific interactive command. The following is sample output from the monitor  
threads command showing the use of the interactive command n after the first display cycle to change  
the number of threads:  
RP/0/RP1/CPU0:router# monitor threads  
Computing times... 87 processes; 249 threads;  
CPU states: 84.8% idle, 4.2% user, 10.9% kernel  
Memory: 256M total, 175M avail, page size 4K  
JID  
TID PRI STATE HH:MM:SS  
CPU COMMAND  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 8  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
monitor threads  
1
553049  
58  
6 10 Run  
1 10 Rply  
3 10 Rcv  
3 10 Rcv  
1 10 Rcv  
5 10 Rcv  
2 10 Rcv  
1 10 Rcv  
1 10 NSlp  
9 10 Intr  
0:00:10  
0:00:00  
0:00:24  
0:00:21  
0:00:20  
0:00:20  
0:00:05  
0:00:05  
0:00:04  
0:00:04  
10.92% kernel  
4.20% top  
0.00% sysdbsvr  
0.00% kernel  
0.00% wdsysmon  
0.00% kernel  
0.00% qnet  
0.00% netio  
0.00% envmon_periodic  
0.00% netio  
1
69  
1
159  
160  
157  
160  
n
Enter number of threads to display: 3  
Please enter a number between 5 and 40  
Enter number of threads to display: 8  
87 processes; 249 threads;  
CPU states: 95.3% idle, 2.9% user, 1.7% kernel  
Memory: 256M total, 175M avail, page size 4K  
JID  
1
69  
TID PRI STATE HH:MM:SS  
CPU COMMAND  
1.76% kernel  
1.11% wdsysmon  
0.40% sysdbsvr  
0.23% envmon_periodic  
0.20% qnet  
0.20% top  
0.13% qnet  
0.10% netio  
6 10 Run  
1 10 Rcv  
3 10 Rcv  
1 10 NSlp  
19 10 Rcv  
1 10 Rply  
12 10 Rcv  
1 10 Rcv  
0:00:11  
0:00:20  
0:00:24  
0:00:04  
0:00:02  
0:00:00  
0:00:03  
0:00:05  
58  
157  
159  
553049  
159  
160  
When a number outside the acceptable range is entered, the acceptable range is displayed:  
Please enter a number between 5 and 40  
Enter number of threads to display:  
Related Commands  
Command  
Description  
Displays interactive, auto-updating process statistics in a full-screen mode.  
Cisco IOS-XR System Management Command Reference  
S MR-2 7 9  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process  
process  
To start, terminate, or restart a process, use the process command in EXEC mode.  
process {blocked | kill | restart | start} [executable-name | job-id] [location {node-id | all}]  
Syntax Description  
blocked  
Collects debug information. The node will be restarted if the mandatory reboot  
flag is set.  
kill  
Kills (stops) a process. The process will not be restarted even if considered  
“mandatory”.  
restart  
Restarts a process.  
Starts a process.  
start  
executable-name  
(Optional) Performs the action for all the simultaneously executing instances of  
the process, if applicable.  
job-id  
(Optional) Performs the action for only the process instance associated with the  
job-id.  
location node-id  
location all  
(Optional) Specifies a node. The node-id argument is entered in the  
rack/slot/module notation.  
(Optional) Specifies all nodes.  
Defaults  
No default behavior or values  
EXEC  
Command Modes  
Command History  
Release  
Modification  
This command was introduced.  
Release 2.0  
Usage Guidelines  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
Under normal circumstances, processes are started and restarted automatically by the operating system  
as required. If a process crashes, it will be automatically restarted.  
You can also use the process commands to manually stop, start or restart individual processes. These  
commands should be used only under the supervision of a Cisco support representative because they can  
cause a loss of router operations.  
Caution  
Manually killing or restarting a process can seriously impact the operation of a router. Use these  
commands only under the direction of a Cisco technical support representative.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 0  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process  
process kill  
The process kill command will shut down (terminate) the specified process and copies associated with  
the specified process. The process is not restarted, even if considered “mandatory.” Use the show  
processes command to display a list of executable processes running on the system.  
Caution  
Killing a process can result in an RP failover, system failure or both. This command is intended for use  
only under the direct supervision of a Cisco technical support representative.  
process restart  
The process restart command is used to restart a process, such as a process that is not functioning  
optimally.  
process start  
The process start command starts a process that is not currently running, such as a process that was  
terminated using the process kill command. If multiple copies are on the system, all instances of the  
process will be started simultaneously.  
process blocked  
This command is used by Cisco support representatives to collect debug information about a process. If  
the mandatory command is set for a process, the process blocked command will also cause the node to  
restart.  
Examples  
In the following example, the OSPF process is restarted with the process restart. command:  
RP/0/RP1/CPU0:router# process restart isis  
RP/0/RP1/CPU0:router#RP/0/RP1/CPU0:Mar 30 15:24:41 : isis[343]: %ISIS-6-INFO_ST  
RTUP_START : Cisco NSF controlled start beginning  
RP/0/RP1/CPU0:router#RP/0/RP1/CPU0:Mar 30 15:24:52 : isis[352]: %ISIS-6-INFO_ST  
RTUP_FINISH : Cold controlled start completed  
In the following example, the OSPF process is terminated with the process kill command:  
RP/0/RP1/CPU0:router# process kill isis  
RP/0/RP1/CPU0:router#  
In the following example, the OSPF process is started with the process start command:  
RP/0/RP1/CPU0:router# process start isis  
RP/0/RP1/CPU0:router#RP/0/RP1/CPU0:Mar 30 15:27:19 : isis[227]: %ISIS-6-INFO_STA  
RTUP_START : Cold controlled start beginning  
RP/0/RP1/CPU0:Mar 30 15:27:31 : isis[352]: %ISIS-6-INFO_STARTUP_FINISH : Cold co  
ntrolled start completed  
Related Commands  
Command  
Description  
Sets the options for mandatory processes.  
Displays information on the running processes.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 1  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process core  
process core  
To change the core dump options for a process, use the process core command in EXEC mode.  
process {executable-name | job-id} core {mainmem | mainmem-sharedmem | mainmem-text |  
mainmem-text-sharedmem | sharedmem | copy | off} [maxcore value] [location node-id]  
Syntax Description  
executable-name  
job-id  
Executable name of the process for which you want to change core  
dump options. Specifying an executable-name value changes the core  
dumping option for multiple instances of a running process.  
Job ID associated with the process instance. Specifying a job-id value  
changes the core dumping option for only a single instance of a  
running process.  
core  
Indicates a core dump option change for the specified process.  
Dumps the main memory of a crashed process.  
mainmem  
mainmem-sharedmem  
mainmem-text  
Dumps the main memory and the shared memory of a crashed process.  
Dumps the main memory and text of a crashed process.  
mainmem-text-sharedmem Dumps the main memory, shared memory and text of a crashed  
process.  
sharedmem  
copy  
Dumps the shared memory of a crashed process.  
Copies a core dump locally before performing the core dump.  
off  
Indicates that a core dump will not be taken upon the termination of  
the specified process.  
maxcore value  
(Optional) Maximum number of core dumps allowed for the specified  
process since its creation.  
location node-id  
(Optional) Sets the core dump options to a designated node. The  
node-id argument is entered in the rack/slot/module notation.  
Defaults  
By default, processes are configured to dump shared memory, text area, stack, data section and heap.  
Command Modes  
Command History  
EXEC  
Release  
Modification  
Release 2.0  
This command was introduced.  
Usage Guidelines  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
The modular architecture of the Cisco IOS-XR software allows core dumps for individual processes. By  
default, processes are configured to dump shared memory, text area, stack, data section and heap.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 2  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process core  
Specifying the process name (executable-name) changes the core dumping option for all instances of the  
process. Specifying a job-id value changes the core dumping option for a single instance of a running  
process.  
Examples  
In the following example, the process core command is used to enable dumping of main memory and  
shared memory:  
RP/0/RP1/CPU0:router# process ospf core mainmem-sharedmem  
In the following example, the process core command is used to turn off core dumping for a process:  
RP/0/RP1/CPU0:router# process media_ether_config_di core off  
Core dumping is turned back on by specifying the type of core dump for a process, as shown in the  
following example:  
RP/0/RP1/CPU0:router# process media_ether_config_di core mainmem-text-sharedmem  
Related Commands  
Command  
Description  
Displays information about processes.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 3  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process mandatory  
process mandatory  
To set the mandatory reboot options for a process, use the process mandatory command in EXEC mode.  
process mandatory  
process mandatory {on | off} {executable-name | job-id} [location node-id]  
process mandatory reboot  
process mandatory reboot {enable | disable}  
process mandatory toggle  
process mandatory toggle {executable-name | job-id} [location node-id]  
Syntax Description  
on  
Turns on mandatory process attribute.  
off  
Turns off the mandatory process attribute. The process will not be  
considered mandatory.  
reboot  
Enables or disables the reboot action when mandatory process fails.  
Toggles mandatory process attribute  
toggle  
executable-name  
Executable name of the process you want to terminate. Terminates the  
process and all the simultaneously executing copies, if applicable.  
job-id  
Job ID associated with the process you want to terminate. Terminates only  
the process associated with the job ID.  
location node-id  
(Optional) Sets the mandatory settings for a process on a designated node.  
The node-id argument is entered in the rack/slot/module notation.  
Defaults  
No default behavior or values  
EXEC  
Command Modes  
Command History  
Release  
Modification  
This command was introduced.  
Release 2.0  
Usage Guidelines  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
If a process unexpectedly goes down, the following action will occur based on whether the process is  
considered “mandatory.”  
If the process is mandatory, and the process cannot be restarted, the node will automatically reboot.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 4  
 
 
Process and Memory Management Commands on Cisco IOS-XR Software  
process mandatory  
If the process is not mandatory and cannot be restarted, it will stay down and the node will not  
reboot.  
Examples  
Turning the mandatory attribute on or off for a process  
In the following example, the mandatory attribute is turned on for the “media_ether_config_di” process:  
RP/0/RP1/CPU0:router# process mandatory on media_ether_config_di  
Turning the reboot option on or off with the process mandatory reboot command  
In the following example, the system is set to reboot the node if a mandatory process goes down and  
cannot be restarted:  
RP/0/RP1/CPU0:router# process mandatory reboot enable  
RP/0/RP1/CPU0:Mar 19 19:28:10 : sysmgr[71]: %SYSMGR-4-MANDATORY_REBOOT_ENABLE :  
mandatory reboot option enabled by request  
In the following example, the system is set not to reboot the node if a mandatory process goes down and  
cannot be restarted. In this case, the mandatory process will be restarted, but the node will not ne  
rebooted.  
RP/0/RP1/CPU0:router# process mandatory reboot disable  
RP/0/RP1/CPU0:Mar 19 19:31:20 : sysmgr[71]: %SYSMGR-4-MANDATORY_REBOOT_OVERRIDE  
: mandatory reboot option overridden by request  
Related Commands  
Command  
Description  
Displays information, attributes and settings for a processes.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 5  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show memory  
show memory  
To display the available physical memory on the networking device and the memory usage of processes  
on the networking device, use the show memory command in EXEC mode.  
show memory [job-id | location node-id | summary]  
Syntax Descriptionl  
job-id  
(Optional) Displays the memory available and memory usage information for  
only the process associated with this job identifier. If the job-id argument is not  
specified, this command displays information for all running processes.  
location node-id  
(Optional) Displays the available physical memory from the designated node.  
The node-id argument is entered in the rack/slot/module notation.  
summary  
(Optional) Displays only a summary of the physical memory and memory usage  
information.  
Command Modes  
Command History  
EXEC  
Release  
Modification  
Release 2.0  
This command was introduced.  
Usage Guidelines  
Examples  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
The following is partial sample output from the show memory command entered without keywords or  
arguments:  
RP/0/RP1/CPU0:router# show memory  
Physical Memory:2048M total  
Application Memory :1802M (1636M available)  
Image:116M (bootram:116M)  
Reserved:128M, IOMem:0, flashfsys:0  
Total shared window:0  
kernel:jid 1  
Address  
0008f000  
000b2000  
Bytes  
12288  
12288  
What  
Program Stack  
Program Stack  
Total Allocated Memory:0  
Total Shared Memory:0  
sbin/devc-pty:jid 68  
Address  
Bytes  
4096  
516096  
8192  
What  
4817f000  
48180000  
481fe000  
48200000  
Program Stack (pages not allocated)  
Program Stack (pages not allocated)  
Program Stack  
28672  
Physical Mapped Memory  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 6  
 
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show memory  
48207000  
48208000  
4096  
4096  
ANON FIXED ELF SYSRAM  
ANON FIXED ELF SYSRAM  
The following is sample output from the show memory command entered with the job ID 7 to show the  
memory usage information for the process associated with this job identifier:  
RP/0/RP1/CPU0:router# show memory 7  
Physical Memory: 256M total  
Application Memory : 249M (217M available)  
Image: 2M (bootram: 2M)  
Reserved: 4M, IOMem: 0, flashfsys: 0  
sbin/pipe: jid 7  
Address  
Bytes  
126976  
4096  
126976  
4096  
126976  
4096  
126976  
4096  
122880  
8192  
12288  
4096  
What  
07f7c000  
07f9b000  
07f9d000  
07fbc000  
07fbe000  
07fdd000  
07fdf000  
07ffe000  
08000000  
0801e000  
08020000  
08023000  
08024000  
08025000  
08029000  
7c001000  
7e000000  
Program Stack (pages not allocated)  
Program Stack  
Program Stack (pages not allocated)  
Program Stack  
Program Stack (pages not allocated)  
Program Stack  
Program Stack (pages not allocated)  
Program Stack  
Program Stack (pages not allocated)  
Program Stack  
Physical Mapped Memory  
Program Text or Data  
Program Text or Data  
Allocated Memory  
4096  
16384  
16384  
319488  
8192  
Allocated Memory  
DLL Text libc.dll  
DLL Data libc.dll  
Related Commands  
Command  
Description  
Displays information about the heap space for a process.  
Displays information about processes, including memory usage.  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 7  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show memory heap  
show memory heap  
To display information about the heap space for a process, use the show memory heap command in  
EXEC mode.  
show memory heap [allocated] [dllname] [failure] [free] [summary] job-id  
Syntax Description  
allocated  
dllname  
failure  
free  
(Optional) Displays a list of all allocated heap blocks.  
(Optional) Displays heaps with DLL names.  
(Optional) Displays a summary of heap failures.  
(Optional) Displays a list of all free heap blocks.  
summary  
job-id  
(Optional) Displays a summary of the information about the heap space.  
Information for the process associated with this job identifier.  
Command Modes  
Command History  
EXEC  
Release  
Modification  
Release 2.0  
This command was introduced.  
Usage Guidelines  
Examples  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
The following is sample output from the show memory heap command, specifying only the job  
identifier 111:  
RP/0/RP1/CPU0:router> show memory heap 111  
Malloc summary for pid 16433:  
Heapsize 16384: allocd 6328, free 8820, overhead 1236  
Calls: mallocs 144; reallocs 73; frees 5; [core-allocs 1; core-frees 0]  
Block Allocated List  
Total  
Usize  
Total  
Size  
Block  
Count  
Name/ID/Caller  
0x000008c1 0x000008cc 0x00000001 0x7c018a10  
0x000005ac 0x00000974 0x00000079 0x7c02b9e0  
0x000004f0 0x000004f8 0x00000001 0x7c02b6fc  
0x00000080 0x00000088 0x00000001 0x7c01936c  
0x00000034 0x00000048 0x00000001 0x7c018954  
0x00000024 0x00000030 0x00000001 0x7c019278  
0x00000018 0x00000020 0x00000001 0x7c019b2c  
0x00000008 0x00000010 0x00000001 0x7c017178  
0x00000008 0x00000010 0x00000001 0x7c00fb54  
0x00000008 0x00000010 0x00000001 0x7c00fb80  
0x00000008 0x00000010 0x00000001 0x7c00fbb8  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 8  
 
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show memory heap  
The following is sample output from the show memory heap command, specifying the allocated and  
free keywords and the job identifier:  
RP/0/RP1/CPU0:router# show memory heap allocated free 5  
Block Allocated List  
Usize  
Size  
Address  
Name/ID/Caller  
0x000008c1 0x000008cc 0x08029e7c 0x7c018a10  
0x000004fc 0x00000504 0x08029554[0x18 0x30-byte objects: 0x1 allocd, 0x17 free]  
caller(id)/usize/addr: 0x7c019278/0x28/0x8029574  
0x000004f0 0x000004f8 0x0802bc00 0x7c02b6fc  
0x0000037c 0x00000384 0x08029a60[0x18 0x20-byte objects: 0x1 allocd, 0x17 free]  
caller(id)/usize/addr: 0x7c019b2c/0x1c/0x8029a80  
0x0000031c 0x00000324 0x0802a7d0[0x20 0x14-byte objects: 0x20 allocd, 0x0 free]  
caller(id)/usize/addr: 0x7c02b9e0/0x10/0x802a7f0,0x802a808,0x802a820,0x802a838,  
0x802a850,0x802a868,0x802a880,0x802a898,0x802a8b0,0x802a8c8,0x802a8e0,0x802a8f8,  
0x802a910,0x802a928,0x802a940,0x802a958,0x802a970,0x802a988,0x802a9a0,0x802a9b8,  
0x802a9d0,0x802a9e8,0x802aa00,0x802aa18,0x802aa30,0x802aa48,0x802aa60,0x802aa78,  
0x802aa90,0x802aaa8,0x802aac0,0x802aad8  
0x0000031c 0x00000324 0x0802ac2c[0x20 0x14-byte objects: 0x20 allocd, 0x0 free]  
caller(id)/usize/addr: 0x7c02b9e0/0x10/0x802ac4c,0x802ac64,0x802ac7c,0x802ac94,  
0x802acac,0x802acc4,0x802acdc,0x802acf4,0x802ad0c,0x802ad24,0x802ad3c,0x802ad54,  
0x802ad6c,0x802ad84,0x802ad9c,0x802adb4,0x802adcc,0x802ade4,0x802adfc,0x802ae14,  
0x802ae2c,0x802ae44,0x802ae5c,0x802ae74,0x802ae8c,0x802aea4,0x802aebc,0x802aed4,  
0x802aeec,0x802af04,0x802af1c,0x802af34  
0x0000031c 0x00000324 0x0802b1a8[0x20 0x14-byte objects: 0x20 allocd, 0x0 free]  
caller(id)/usize/addr: 0x7c02b9e0/0x10/0x802b1c8,0x802b1e0,0x802b1f8,0x802b210,  
0x802b228,0x802b240,0x802b258,0x802b270,0x802b288,0x802b2a0,0x802b2b8,0x802b2d0,  
0x802b2e8,0x802b300,0x802b318,0x802b330,0x802b348,0x802b360,0x802b378,0x802b390,  
0x802b3a8,0x802b3c0,0x802b3d8,0x802b3f0,0x802b408,0x802b420,0x802b438,0x802b450,  
0x802b468,0x802b480,0x802b498,0x802b4b0  
0x0000031c 0x00000324 0x0802b8d4[0x20 0x14-byte objects: 0x19 allocd, 0x7 free]  
caller(id)/usize/addr: 0x7c02b9e0/0x10/0x802b8f4,0x802b90c,0x802b924,0x802b93c,  
0x802b954,0x802b96c,0x802b984,0x802b99c,0x802b9b4,0x802b9cc,0x802b9e4,0x802b9fc,  
0x802ba14,0x802ba2c,0x802ba44,0x802ba5c,0x802ba74,0x802ba8c,0x802baa4,0x802babc,  
0x802bad4,0x802baec,0x802bb04,0x802bb1c,0x802bb34  
0x0000029c 0x000002a4 0x0802901c[0x20 0x10-byte objects: 0x4 allocd, 0x1c free]  
caller(id)/usize/addr: 0x7c017178/0xc/0x802903c 0x7c00fb54/0xc/0x8029050 0x7c00  
fb80/0xc/0x8029064 0x7c00fbb8/0xc/0x8029078  
0x0000027c 0x00000284 0x080292c8[0x8 0x48-byte objects: 0x1 allocd, 0x7 free]  
caller(id)/usize/addr: 0x7c018954/0x38/0x80292e8  
0x00000080 0x00000088 0x08029dec 0x7c01936c  
Block Free List  
Size  
Address  
0x00000078 0x0802a750  
0x00000128 0x0802aafc  
0x00000248 0x0802af58  
0x000003f8 0x0802b4d4  
0x00000ef8 0x0802c100  
The following is sample output from the show memory heap command, specifying the summary  
keyword and the job identifier:  
RP/0/RP1/CPU0:router# show memory heap summary 65  
Malloc summary for pid 20495 process pcmciad:  
Heapsize 65536: allocd 40332, free 16568, overhead 8636  
Calls: mallocs 883; reallocs 3; frees 671; [core-allocs 4; core-frees 0]  
Band size 16, element per block 48, nbuint 1  
Completely free blocks: 0  
Block alloced: 2, Block freed: 0  
allocs: 85, frees: 20  
allocmem: 1040, freemem: 496, overhead: 448  
Cisco IOS-XR System Management Command Reference  
S MR-2 8 9  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show memory heap  
blocks: 2, blknodes: 96  
Band size 24, element per block 34, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 243, frees: 223  
allocmem: 480, freemem: 336, overhead: 168  
blocks: 1, blknodes: 34  
Band size 32, element per block 26, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 107, frees: 97  
allocmem: 320, freemem: 512, overhead: 136  
blocks: 1, blknodes: 26  
Band size 40, element per block 22, nbuint 1  
Completely free blocks: 0  
Block alloced: 2, Block freed: 0  
allocs: 98, frees: 74  
allocmem: 960, freemem: 800, overhead: 240  
blocks: 2, blknodes: 44  
Band size 48, element per block 18, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 53, frees: 42  
allocmem: 528, freemem: 336, overhead: 104  
blocks: 1, blknodes: 18  
Band size 56, element per block 16, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 8, frees: 4  
allocmem: 224, freemem: 672, overhead: 96  
blocks: 1, blknodes: 16  
Band size 64, element per block 14, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 6, frees: 2  
allocmem: 256, freemem: 640, overhead: 88  
blocks: 1, blknodes: 14  
Band size 72, element per block 12, nbuint 1  
Completely free blocks: 0  
Block alloced: 1, Block freed: 0  
allocs: 1, frees: 0  
allocmem: 72, freemem: 792, overhead: 80  
blocks: 1, blknodes: 12  
Related Commands  
Command  
Description  
Displays the available physical memory and processes memory on a router.  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 0  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
show processes  
To display information about active processes, use the show processes command in EXEC mode.  
show processes [job-id | process-name] {aborts | blocked | boot | cpu | distribution | dynamic |  
failover | family | files | location | log | mandatory | memory | searchpath | signal | startup |  
threadname} [location node-id]  
Syntax Description  
job-id  
(Optional) Displays information for only the process instance associated  
with the job-id argument.  
process-name  
(Optional) Displays information for all the simultaneously executing  
instances of the process, if applicable.  
aborts  
Displays process aborts.  
blocked  
boot  
Displays details about reply/send/mutex blocked processes.  
Displays process boot information.  
cpu  
Displays CPU use per process.  
distribution  
dynamic  
failover  
family  
Displays the distribution of processes.  
Displays process data for dynamically created processes.  
Displays process failover information.  
Displays the process session and family information.  
Displays information about open files and open communication channels.  
Displays process log.  
files  
log  
mandatory  
memory  
searchpath  
signal  
Displays process data for mandatory processes.  
Displays information about the text, data, and stack usage for processes.  
Displays the search path.  
Displays the signal options for blocked, pending, ignored, and queued  
signals.  
startup  
Displays process data for processes created at startup  
Displays thread names.  
threadname  
location node-id  
(Optional) Displays information about the active processes from a  
designated node. The node-id argument is entered in the rack/slot/module  
notation.  
Command Modes  
Command History  
EXEC  
Release  
Modification  
Release 2.0  
This command was introduced.  
Usage Guidelines  
To use this command, you must be in a user group associated with a task group that includes the proper  
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services  
on Cisco IOS-XR Software module of the Cisco IOS-XR System Security Configuration Guide.  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 1  
 
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
The show processes command displays general information on the active processes. To view more  
detailed information for a process, include the job-id or process-name.  
You can also use the monitor command to determine the top users of the CPU.  
Examples  
The following is partial sample output from the show processes command:  
RP/0/RP1/CPU0:router# show processes  
JID  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
TID LastCPU Stack pri state  
HR:MM:SS:MSEC NAME  
1
0
1
1
1
0
1
0
0
1
1
1
0
1
1
1
0
1
0
0K  
0K  
0 Ready  
1:57:41:0542 procnto-600-smp-cisco-instr  
1:57:37:0022 procnto-600-smp-cisco-instr  
0:00:05:0723 procnto-600-smp-cisco-instr  
0:00:00:0001 procnto-600-smp-cisco-instr  
0:00:00:0000 procnto-600-smp-cisco-instr  
0:00:00:0000 procnto-600-smp-cisco-instr  
0:00:00:0000 procnto-600-smp-cisco-instr  
0:00:01:0885 procnto-600-smp-cisco-instr  
0:00:03:0416 procnto-600-smp-cisco-instr  
0:00:00:0001 procnto-600-smp-cisco-instr  
0:00:04:0861 procnto-600-smp-cisco-instr  
0:00:02:0020 procnto-600-smp-cisco-instr  
0:00:03:0278 procnto-600-smp-cisco-instr  
0:00:00:0732 procnto-600-smp-cisco-instr  
0:00:02:0692 procnto-600-smp-cisco-instr  
0:00:03:0788 procnto-600-smp-cisco-instr  
0:00:11:0785 procnto-600-smp-cisco-instr  
0:00:04:0037 procnto-600-smp-cisco-instr  
2
0 Running  
3
4
5
6
7
8
9
10  
11  
15  
18  
20  
21  
22  
23  
25  
0K 10 Receive  
0K 10 Receive  
0K 63 Receive  
0K 63 Receive  
0K 63 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Receive  
0K 10 Running  
0K 10 Receive  
0K 10 Receive  
1
1
--More--  
The show process process-name command displays detailed information about a process:  
RP/0/RP1/CPU0:router# show processes ospf  
Job Id: 261  
PID: 139453  
Executable path: /hfr-rout-0.44.0/bin/ospf  
Instance #: 1  
Version ID: 00.00.0000  
Respawn: ON  
Respawn count: 1  
Max. spawns per minute: 12  
Last started: Wed Mar 17 07:46:26 2004  
Process state: Run  
Package state: Normal  
Started on config: cfg/gl/ipv4-ospf/proc/100/ord_a/routerid  
core: TEXT SHAREDMEM MAINMEM  
Max. core: 0  
Mandatory: ON  
Placement: ON  
startup_path: /pkg/startup/ospf.startup  
Process cpu time: 0.410 user, 0.183 kernel, 0.593 total  
JID  
261  
261  
261  
261  
TID LastCPU Stack pri state  
HR:MM:SS:MSEC NAME  
0:00:00:0397 ospf  
0:00:00:0003 ospf  
0:00:00:0007 ospf  
0:00:00:0000 ospf  
1
2
3
4
0
1
0
1
40K 10 Receive  
40K 10 Receive  
40K 10 Receive  
40K 10 Condvar  
--More--  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 2  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
The show processes memory command displays details of memory usage for a given process or for all  
processes, as shown in the following example:  
RP/0/RP1/CPU0:router# show processes memory  
JID  
55  
Text  
Data  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
4096  
Stack  
69632  
20480  
45056  
77824  
57344  
143360  
24576  
36864  
40960  
28672  
32768  
110592  
40960  
40960  
40960  
40960  
40960  
40960  
Dynamic Process  
17072128 eth_server  
13238272 hfr_fgid_server  
10526720 syslogd  
9797632 bgp  
5877760 parser_server  
3084288 netio  
2314240 nvram  
1699840 sysdb_svr_local  
1576960 wdsysmon  
1490944 nvgen_server  
1425408 hd_drv  
1421312 qnet  
1392640 ospf  
1392640 ospf  
1392640 ospf  
1392640 ospf  
1392640 ospf  
1392640 ospf  
28672  
143360  
167936  
512000  
57344  
40960  
8192  
164  
317  
122  
265  
254  
63  
314  
341  
259  
189  
69  
348  
347  
346  
345  
344  
261  
4096  
495616  
53248  
32768  
77824  
323584  
323584  
323584  
323584  
323584  
323584  
--More--  
The following is partial sample output from the show processes signal command:  
RP/0/RP1/CPU0:router# show processes signal  
pid name  
signals pending signals ignored  
signals queued  
tid  
1 kernel  
1
2
signals blocked signals pending  
0000000000000000 0000000006c20100 0000000000000000  
0000000000000000 00ffffffffffffff  
0000000000000000 00ffffffffffffff  
3
4
5
6
7
8
9
10  
11  
12  
14  
14  
15  
16  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
0000000000000000 00ffffffffbffeff  
--More--  
The following is partial sample output from the show processes family command:  
RP/0/RP1/CPU0:router# show processes family  
id name  
1 kernel  
session pgroup  
ppid sibling  
child  
0
5
1
1
1
1
1
1
1
1
72  
2
0
71  
71  
71  
71  
71  
71  
71  
0
0
0
72 wd-mbi  
53 dllmgr  
278 qsm  
67 pkgfs  
68 devc-pty  
52 devc-conaux  
0
278  
67  
68  
52  
54  
72  
67  
68  
65545  
0
65669  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 3  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
65545 pkgfs  
65546 ksh  
66 pipe  
1
65545  
65546  
66  
67  
52  
71  
71  
71  
71  
71  
65  
71  
71  
71  
0
0
0
0
0
0
0
0
65546  
1
1
1
1
1
1
1
1
1
52  
61  
66  
56  
64  
0
65  
70  
63  
56 devf-scrp  
56  
61  
64  
65  
65  
70  
63  
55  
61 mqueue  
64 pci_bus_mgr  
65 pcmciad  
65559  
65552 cardmgrd  
70 syslogd_helper  
63 nvram  
55 eth_server  
--More--  
0
0
0
0
The following is partial sample output from the show processes files command:  
RP/0/RP1/CPU0:router# show processes files  
JID  
1
72  
Open Files NAME  
13  
4
kernel  
wd-mbi  
53  
278  
67  
588  
16  
6
dllmgr  
qsm  
pkgfs  
68  
52  
65545  
65546  
66  
4
45  
5
5
4
devc-pty  
devc-conaux  
pkgfs  
ksh  
pipe  
56  
61  
3
4
devf-scrp  
mqueue  
64  
65  
65552  
70  
63  
9
11  
6
16  
13  
14  
pci_bus_mgr  
pcmciad  
cardmgrd  
syslogd_helper  
nvram  
55  
eth_server  
--More--  
The following is partial sample output from the show processes blocked command:  
RP/0/RP1/CPU0:router# show processes blocked  
Jid  
65546  
105  
105  
324  
65669 1237125  
236 123014  
163 123022  
163 123022  
335 139436  
65740 1401036  
65741 1401037  
Pid Tid  
Name State Blocked-on  
4106  
1
2
3
1
1
2
2
3
1
1
1
ksh Reply  
attachd Reply  
attachd Reply  
tftp_server Reply  
exec Reply  
4104 devc-conaux  
20499 eth_server  
4109 mqueue  
41012  
41012  
41031  
4109 mqueue  
1 kernel  
lpts_fm Reply  
fdiagd Reply  
fdiagd Reply  
41049 lpts_pa  
20499 eth_server  
4109 mqueue  
udp_snmpd Reply 123005 udp  
more Reply  
show_processes Reply  
4107 pipe  
1 kernel  
The following is partial sample output from the show processes boot command:  
RP/0/RP1/CPU0:router# show processes boot  
Band  
Name  
Finished %Idle  
JID  
Ready  
Last Process  
----- -------- -------- -------- -------- ------- ---------------------------  
1.0 MBI  
40.0 ARB  
100.0 INFRA  
150.0 ACTIVE  
15.582 67.770%  
26.713 93.540%  
144.134 77.020%  
58 15.582 insthelper  
281 11.131 redcon  
198 117.421 instdir  
168.367  
0.090%  
271 24.233 policy_repository  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 4  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
999.0 FINAL  
177.738  
JID  
0.000%  
172  
9.371 fm_script_dir  
Process  
Started Level  
Inst Ready  
------- ----- -------- ---- ------- -------------------------------  
0.000  
0.000  
0.000  
0.000  
0.000  
0.000  
0.000  
0.000 16.0  
0.000 20.0  
--More--  
0.5  
1.0  
2.0  
3.0  
3.0  
6.0  
8.0  
72  
53  
67  
52  
68  
66  
61  
56  
64  
1
1
1
1
1
1
1
1
1
0.000 wd-mbi  
0.000 dllmgr  
0.000 pkgfs  
0.000 devc-conaux  
0.000 devc-pty  
0.000 pipe  
0.000 mqueue  
0.000 devf-scrp  
0.000 pci_bus_mgr  
The following is sample output from the show processes cpu command:  
RP/0/RP1/CPU0:router# show processes cpu  
CPU utilization for one minute: 1%; five minutes: 1%; fifteen minutes: 1%  
PID  
1
3
1Min  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
5Min  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
0%  
15Min Process  
0% kernel  
0% dllmgr  
0% wd-mbi  
0% pkgfs  
0% devc-pty  
0% devc-conaux  
0% pkgfs  
0% ksh  
0% pipe  
4098  
4102  
4103  
4104  
4105  
4106  
4107  
4109  
12300  
16398  
20495  
20496  
20497  
0% mqueue  
0% devf-scrp  
0% pci_bus_mgr  
0% pcmciad  
0% cardmgrd  
0% syslogd_helper  
--More--  
The following is partial sample output from the show processes log command:  
RP/0/RP1/CPU0:router# show processes log  
01/01 00:00:02.091 1 Hello from init !!  
01/01 00:00:02.093 1 Wait for pkgfs at '/pkg'  
01/01 00:00:03.138 1 Boot Device = /dev/null  
01/01 00:00:03.139 1 Create event manager  
01/01 00:00:03.199 1 Attach to msg channel  
01/01 00:00:03.200 1 Create msg handling thread  
01/01 00:00:03.200 2 sysmgr_lite_process_msg: In sysmgr_process_msg thread  
01/01 00:00:03.200 2 Attaching respawn handler  
01/01 00:00:03.201 1 read_init_startup_list: opening directory /pkg/init.d for .  
init files  
01/01 00:00:03.201 2 Attaching async handler  
01/01 00:00:03.202 2 Attaching sync handler  
01/01 00:00:03.202 2 starting ih_timer  
01/01 00:00:03.202 2 lite_set_timer: id=1, 1800 seconds  
01/01 00:00:03.202 2 Servicing msgs  
01/01 00:00:03.205 1 read_init_startup_list: Opening /pkg/init.d/bfm.init  
01/01 00:00:03.208 1 read_init_startup_list: finished /pkg/init.d/bfm.init pcb->  
name=bfm_server  
01/01 00:00:03.208 1 read_init_startup_list: Opening /pkg/init.d/clock_chip.init  
01/01 00:00:03.210 1 read_init_startup_list: finished /pkg/init.d/clock_chip.ini  
t pcb->name=clock_chip  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 5  
 
Process and Memory Management Commands on Cisco IOS-XR Software  
show processes  
01/01 00:00:03.211 1 read_init_startup_list: Opening /pkg/init.d/devc_conaux.ini  
t
01/01 00:00:03.213 1 read_init_startup_list: finished /pkg/init.d/devc_conaux.in  
it pcb->name=devc-conaux  
01/01 00:00:03.213 1 read_init_startup_list: Opening /pkg/init.d/dllmgr.init  
01/01 00:00:03.215 1 read_init_startup_list: finished /pkg/init.d/dllmgr.init pc  
b->name=dllmgr  
01/01 00:00:03.215 1 read_init_startup_list: Opening /pkg/init.d/dumper.init  
--More--  
Related Commands  
Command  
Description  
Displays auto-updating process statistics in a full-screen mode.  
Displays auto-updating process and thread statistics in a full-screen mode.  
Cisco IOS-XR System Management Command Reference  
S MR-2 9 6  
 

Bodum Gas Grill 11450P User Manual
Boston Acoustics Car Speaker RC420 User Manual
Boston Acoustics Speaker VRi553 User Manual
Bowers Wilkins Speaker PCS8 User Manual
Califone Portable Speaker PI30 Series User Manual
Canon Camera Lens 2577A002 User Manual
Carrier Furnace 58DFA User Manual
Carrier Heat Pump 30RA User Manual
Cateye Watch Q3A User Manual
Chicago Electric Cordless Saw 96698 User Manual